Lysol claims you can use All-Purpose Cleaner for cleaning or disinfecting your hardwood floor without any damage to the wood. The company says you can also use Lysol Clean & Fresh Multi-surface Cleaner for non-porous hardwood surfaces.
Cleaning your wooden floors with Lysol®
You can clean polished wood or non-porous hardwood floors with Lysol® . If you're just looking to – you can use Lysol® All-Purpose Cleaner to clean and disinfect your floor surface without causing damage to the wood.
Yes, you can spray Lysol on upholstery, carpet, curtains, bedding etc..kills germs, smells great.
Sometimes you can take a very lightly alchohol dampened cloth and gently, very gently wipe over the area. Don't press into the wood and don't stay in one spot too long. You can also try a heat source like a hair dryer.
A simple solution of half a cup of distilled white vinegar, half a cup of warm water and a teaspoon of mild dish detergent like Dawn will also do the trick. Be sure to test the mixture first in a hidden area of the wood to make sure it does not damage the finish.
A mixture of 1 part Chlorine Bleach, (Clorox) to 32 parts water (½ cup bleach per gallon of water, or 4 teaspoons bleach per quart of water) will need to sit on surfaces for 5-10 minutes in order to disinfect them. We found this did not harm either of our wood finishes.
The Lysol brand cleaning product can leave a stain on the fabric of a sofa or on a carpet or rug that it has cleaned. You can remove the Lysol stain with some cleaning supplies purchased from a hardware store or a home and garden shop. A few household supplies will be needed as well, but no special tools or equipment.
macrumors regular. If your looking to sanitize the cover, 70% alcohol (ethanol or isopropyl) would be fine. If your really looking to disinfect (to which there would really be no need) then you can use Lysol/Clorox (benzalkonium chloride, not the bleach ones) wipes. Alcohol nor Lysol wipes will harm your case.
Hold the can upright 6-8 inches from the surface and spray from 3-4 seconds until covered. Let surface remain wet for 3 minutes to disinfect. Apply to items that can bring germs into your home such as shoes, backpacks, coats and packages. Also use on soft surfaces such as couches, pillows and mattresses.
Using Lysol Safely
Lysol Max Cover Disinfectant Mist can be sprayed onto pillows, mattresses and other bedding materials. Allow the bedding to dry completely before contact with skin.
When you're doing a DIY woodworking project, it's a good idea to start with a fresh, clean surface. But whatever you do, if you're working with untreated wood, don't use a Clorox wipe to clear off dust and dirt. Because untreated or unpainted wood is porous, disinfectant wipes can leave it with a big, ugly stain.
The directions indicate that they are safe for finished wood surfaces, but to test first in an inconspicuous area, so make sure you do that first before using them on any new wood surfaces. (You may also want to check out these wood furniture cleaner and polish reviews though, to use instead.)
Although the team at Lysol describes its product as safe to use on wood floors, they also suggest using a solution of water and Lysol Multi-Surface Cleaner, or the product at full strength, on the wood for between 1 to 6 minutes, depending on whether you want to clean or sanitize.
Lysol is generally a solid brand for evaporation after use. With the scrubbies, I was hesitant about the amount of liquid and then if any of the fibers would be left behind. Nothing was left after I wiped it, and it only took a few moments to dry! nothing sticky left behind either!
General disinfectant sprays that you might have around the house or find at the store are billed as sprays to clean and kill germs on all surfaces. You can use these on fabrics, says Hanson. One of the most common general disinfectants is Lysol, and it works to kill germs no matter where you spray it.
Misusing Lysol disinfecting spray
“Lysol spray is a disinfectant — it's designed for use on surfaces,” said Joe Rubino, director of research and development for microbiology at Reckitt Benckiser, Lysol's parent company. “It is not meant to be used on the body, whether it be humans or pets.
Pine-Sol is an effective cleaner as well as a deodorizer and disinfectant that has been around since 1929, and is suitable for wood if used properly.
The Effects of Hydrogen Peroxide on Wood
Hydrogen peroxide works to clean and sanitize wood. When used on wood floors, it removes surface dirt as well as stubborn stains. Whether your hardwood floors have pet stains, dirt, mud or just about anything else, hydrogen peroxide can restore their appearance.
Sanitisers that contain abrasives, ammonia, bleach, spirit or other aggressive chemicals will all corrode the lacquer and so ruin the table top.
Try mixing a weak solution of water and dishwashing soap. Dip a soft cloth in the solution, wring it out and wipe the entire piece. You want a damp cloth, not a wet one. Don't saturate the wood, and rinse your cloth often.