It all depends on the type of pool and the chemical levels in the pool. Your pool can keep running for a few days with no problems while without a pump. However, know that a standard pool needs a pool running for at least once in 24 hours, or you might notice an algae bloom.
As long as you can see the bottom of the pool at the deep end and FC is above minimum but below SLAM levels, you're good to go. Sounds like you're watching the chemistry well, so go for it!
In most cases, you can operate the cartridge pool filter without the filter cartridge inside the tank just to maintain circulation as you wait for the cartridge to dry. However, doing so requires you to ensure you've removed all the internal parts and reassembled the tank tightly.
If you are going to have a swimming pool, you must have a filter system that collects all the debris that can accumulate in a pool. In most areas there are actually legal requirements as to how quickly the water in the pool must go through the filtering system.
Yes, you could do that. If you use liquid chlorine you could pour it in, run the pump about 1/2 an hour and then shut it off. Just make sure the skimmer basket is in place so you don't suck any large debris into the system.
Your pool can keep running for a few days with no problems while without a pump. However, know that a standard pool needs a pool running for at least once in 24 hours, or you might notice an algae bloom. So, it's best to have your pump ready as soon as possible.
Be aware that the longest amount of time a pump should be off is two weeks. If you will be gone for longer than this, then the pool must remain clean while you are away. You can keep your pump on but turn off the filtration system to avoid running up electricity bills.
Well maintained pool water can last up to 5, maybe even seven years before you need to replace it. This means weekly cleaning, functional filters, and checking ph levels every day.
How long does it take for water to become stagnant? It depends on water location, temperature and surrounding conditions. Standing water can support insects, bacteria and mold growth in as little as 24 hours.
Dirty water becomes a breeding ground for parasites, mold, and bacterial. The bacteria keep growing if the water is not wiped. Within 48 hours, you will see that the entire surface of the pool is covered with mold. As mentioned above, stagnant water attracts rodents and insects.
To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.
If you are without power, grab your pool brush! Not only will scrubbing the sides and bottom reduce or prevent algae, it also causes the water to move and circulate, helping maintain an even level of chlorine throughout the pool.
Keep the pump and filter on while you are away.
Most pumps come have an automatic timer that makes this very easy. Set it before you leave to ensure the pool filter system will run at least 8 to 12 hours per day.
When you cannot circulate water, the water stagnates and chemicals tend to settle out in the lower levels of the pool. It makes it almost impossible to add any chemicals because you don't have a good way to mix the water. Now, if you bring the FC up really high, you can provide some protection there.
Short answer--yes. The first response, however, would be why would you use a pool without a filter? The sand filter or other filtration system is essential to the health and safety of the swimmers. It is also necessary to have a circulation pump for maximum chlorination.
Pool pumps typically disperse chlorine into the water for you, but it is possible to add chlorine without a pump. The easiest way to do this is with chlorine tablets. They go in a designated floating container and slowly dissolve while floating around the pool. You can also use inline chlorinators.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
The chlorine levels will be higher than what you need, but that one-time shock won't be harmful to the pool. If you will be gone for several weeks or months, you'll need to hire someone to do the pool maintenance for you, including shocking the pool once a week.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
The procedure for adding granular chlorine is pretty much the same as adding calcium chloride or sodium bicarb to a pool. Measure the dry chemical, pre-dissolve in a bucket, and pour around the perimeter of the pool (never into the skimmer directly). There are a few types of dry, granular chlorine.
The pool must be maintained and taken care of regularly; if not, it may lead to various accidents, diseases, and infections. Maintaining the cleanliness of your pool is just one of the many ways of swimming pool care. It is recommended to have your pool cleaned at least once a week to keep it clean and uncontaminated.
A Dirty Pool Can Make You Sick
Without proper maintenance and care, a dirty pool can cause recreational water illnesses (RWIs). These illnesses include diarrhea, ear infections, respiratory infections, rashes, and/or inflamed eyes and lungs. That may sound alarming, but a well-maintained pool leaves nothing to fear.
The Bottom Line about Pools and Chlorine
As mentioned above, you could probably swim in a pool without chlorine without any major health issues. However, long-term use of a pool lacking chlorinated H2O could make you sick or, at the very least, contribute to rashes and other types of skin irritation.