Use LIQUID NAILS FUZE*IT All-Surface Construction Adhesive (LN-2000), or LIQUID NAILS Ultra Qwik Grip Adhesive (LN-990) for your interior trim and molding installation to save you time and to give you a better finished product.
Installing Crown Molding On A Cabinet with Titebond No-Run, No-Drip Wood Glue. Titebond No-Run, No-Drip Wood Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a profes.
18 gauge trim nailer is great for crown molding and quarter round. If you get the M18 version that shoots up to 2-1/4``, you can do baseboards as well. The M12 only goes up to 1-1/2'' which is potentially not enough holding power.
LIQUID NAILS Paneling Wood and Foam Molding Adhesive (LN-606) is specially designed for projects like paneling and molding where instant hold is needed.
What am I nailing with? Crown is typically nailed up with a 2” finishing nail and a compressor and finishing gun. Outside corners are usually done with a brad nailer and 1” brad nails with glue. Studs are generally 3-1/2”, drywall a ½” and the crown moulding a minimum of ½”; therefore 2” finishing nails are necessary.
Non-porous surfaces — like plastics, metals and painted surfaces — can slow drying or curing time of construction adhesive and caulk from 24 hours to several days, or even weeks!
Installing it is as simple as buying a box of itty-bitty finishing nails and hammering in the molding. Seriously, you do not even need a nail gun. Here's the whole step-by-step for how to install baseboards and crown molding—note that most of the work happens in the planning phase.
Finish nails: Works best for thicker wood and heftier projects such as stair treads, crown moulding, window and door casing. Good for installing doors and windows, providing good holding strength while being easy to cover.
You'll use construction adhesive and a brad nail gun to attach the molding to the wall and, when you can, to ceiling joists.
Measure the Room and Mark Studs
You'll also want to nail the crown moulding into a stud for a secure hang.
I use hot glue all the time for outside crown corners and other crown and trim work. It's the best idea I have ever come up with to make life easier when hanging crown. From contributor R: Titebond Moulding and Trim Glue.
When Shouldn't You Use Crown Molding? Crown molding isn't advisable in any room with vaulted ceilings. Also called high ceilings, vaulted ceilings feature an arched design that creates more space above the room.
LIQUID NAILS® Cove Base & Stair Tread Adhesive, CB-10, is a water-resistant, latex-based construction adhesive. It offers quick initial grab without bracing. CB-10 is designed specifically to bond vinyl or rubber cove base and stair treads.
A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.
Crown molding is an inexpensive and easy way to add visual interest and value to your home. With just a few tools and basic carpentry knowledge, you can achieve a stylish upgrade within any space.
Hold the finishing tool in one hand, and line it up with your nail. With your other hand, hammer the end of the finishing tool to drive your nail into the trim- nick free. Using spackling compound or wood putty, smooth over the nails completely. Caulk along the top and bottom of the molding.
Trim or finishing nails have to be counterset to look good, and that can be tricky to get right as well. Almost any kind of wood glue or general adhesive caulk is perfect for sealing your new baseboard molding into place.
1) Never leave crown moldings closer than 9 inches from a ceiling. Once you get within a foot of the ceiling you should have the cabinetry and molding meet the ceiling. Don't create spaces that look odd and that can't be cleaned. Molding too close to ceiling without reaching it.
For the corners, use glue and 1-inch brad nails. For crown molding that is exceptionally thick (or if you have plaster ceilings), 16 gauge finish nails with a length of 2 ½” “ is recommended.
5.2 The shelf life of Liquid Nails High Strength Construction Adhesive is 12 to 18 months.
LIQUID NAILS® Siding and Trim Construction Adhesive, LN-501, is formulated for use as a fast-setting, high-performance adhesive that bonds PVC shims to PVC siding and PVC trim components to common construction surfaces.
No, each LIQUID NAILS adhesive product is specifically formulated to bond various substrates and common building materials with different construction requirements.