DISINFECTANTS FOR CERAMIC, PORCELAIN, GLASS & QUARTZ Many disinfectants can be used on these materials, due to their resistance to common household chemicals. 70% Isopropyl alcohol, diluted bleach or 3% hydrogen peroxide can be used.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
While isopropyl alcohol is a versatile and reliable detailing product, it's essential to recognize its limitations to avoid improper use. IPA is excellent for removing light residues such as oils, waxes, or polish remnants, but it is not designed to tackle tougher layers like ceramic coatings or heavy-duty sealants.
Rubbing alcohol is excellent for deep cleaning, but you don't want to overdo its use. Too much rubbing alcohol dries tile and grout, creating a dull appearance. Dry tile also becomes brittle over time, while overly dry grout loses its adhesion. To use rubbing alcohol safely, add just a capful to a gallon of warm water.
Household cleaner and is great for cleaning kitchens, bathrooms, and other surface areas: Use 100% Isopropyl Alcohol Straight. Cleans sticky grime and residue: Use 100% Isopropyl Alcohol Straight. Perfect for cleaning computer screens, phones, iPad screen, and is non-streaking: Use 100% Isopropyl Alcohol Straight.
In fact, good old dish soap works great for giving your toilet a scrub. You can also use plain, white vinegar or rubbing alcohol (about a cup or two of EITHER but NOT both) if you need a bit more sanitizing power.
DISINFECTANTS FOR CERAMIC, PORCELAIN, GLASS & QUARTZ
70% Isopropyl alcohol, diluted bleach or 3% hydrogen peroxide can be used.
Avoid oil- and wax-based cleaners and never use a solution containing acids, ammonia, or bleach on your glazed porcelain tiles. These products can alter the color of the tile and eat away the grout.
Harsh chemicals can be very damaging to ceramic tiles. They can strip away the sealant, causing the tile to become stained or discolored. They can also eat away at the grout, causing it to crack or crumble. Some examples of harsh chemicals that you should avoid using on tile are chlorine bleach and ammonia.
Yes, you probably can use white vinegar on a ceramic coating, but we would not recommend it. White vinegar is acidic, and ceramic coatings are quite resistant to acid. But the only good reason to use white vinegar is to remove substances that can be dissolved by acid, such as mineral deposits or water spots.
If used correctly—diluted and rinsed off promptly—it poses minimal risk to your paint. However, if left to sit or used in large amounts, the alcohol can soften the clear coat, leading to dullness or even peeling.
Do not use abrasive or acidic cleaners as they can damage the porcelain surface. Avoid using steel wool or rough brushes that can scratch the tiles. Don't allow cleaning solutions to sit on the tiles for extended periods, as it may cause discoloration.
For stains, use white vinegar and water: Add white vinegar (¼ cup) to two gallons of warm water. Use the solution to mop the stained, glazed porcelain tiles. Vinegar cleans, disinfects, and deodorizes floors. After mopping, allow the solution to sit for 5 to 10 minutes, and then rinse off the solution.
Never use detergents which contain waxes, oily substances or fragrances, or products which apply polish to the surface: apart from being unnecessary, they may also leave a film which is then hard to remove (and to which other dirt will stick).
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
Too often floors are cleaned with a mop and they don't change their water frequent enough nor do they rinse the floor properly. This results in dirty water evaporating on the surface of the tile leaving a dirty residue in the low spots of the tile.
Some household members will use vinegar to clean porcelain tiles. However, experts suggest this is not a good idea because vinegar has a high acidic content which can damage the quality of the porcelain.
Alcohol, ammonia, bleach and products containing these substances will bleach a waxed finish. If they drip onto a waxed terracotta floor, they can form white stains which are very difficult to remove. Use PS87 Heavy Duty Cleaner, to strip the entire surface.
Tougher Stains:
Hard scrubbing can damage porcelain. If Daily Cleaning does not remove the discoloration, the use of Hydrogen Peroxide can help remove the discoloration.
For most types of tile, including porcelain and ceramic, you only need two ingredients—warm water and dish soap. In a spray bottle, combine warm water with a few drops of dish soap. Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
Some smokers prefer to clean their glass with isopropyl alcohol, which is often paired with salt.
Baking Soda and Vinegar
Baking soda is also a mild abrasive, so it will remove stains and grime from your toilet bowl. To clean your toilet, use one cup of baking soda with two cups of white vinegar. Brush it into the bowl, let it sit for five minutes, then flush again with the water on full force.
Not only does alcohol make an excellent bedding and mattress disinfectant spray, but spraying alcohol on sheets also helps to eliminate unpleasant odors caused by sweat, spills, and other sources to leave your bed smelling nice and fresh.