A solution of vinegar diluted 1-to-1 with water or a diluted commercial ceramic tile cleaner can be used to clean stains.
Grab your bucket and fill it up with 1 gallon of hot water then stir in ¼ cup of white vinegar. Vinegar is a tough yet natural cleaning solution that will surely clean up any messes that may be found on your tile. Go on and mop the floor with your vinegar solution. Or use a large sponge.
Especially ceramic and porcelain tile and grout! Blue dawn does not discolor grout joints and further is a great degreasing agent from everyday traffic. Use daily to weekly. The more traffic, the more cleaning.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3' x 3' area and start mopping.
That's right: water alone is enough to clean lightly soiled porcelain and ceramic tile surfaces. No harsh chemicals are necessary! If you choose to use a mop for your flooring, be sure you have swept up debris beforehand and use a flat mop rather than a sponge mop to keep from pushing dirty water into the grout lines.
Vinegar is excellent on glazed porcelain tiles as it brings out its shiny exterior. After mopping, rinse the floor once more using clean water. Make sure to wipe the tile dry with a microfiber cloth to avoid streaking and to prevent water from penetrating the grout.
When it comes to mopping tiles, they can collect a lot of dust and dirt. If we don't brush this away before mopping, it can build up and cause the tiles to look unclean. Even when not mopping, we recommend doing this anyway as part of a regular maintenance cleaning process.
Murphy® Oil Soap and other non-synthetic solutions are safe to use on tile and grout without wearing down either one, but other natural solutions include rubbing alcohol, particularly for more set spots of mildew. Fill a spray bottle with your solution and apply it where it's needed.
Tile cleaner
If you'd like one product that cleans everything in your bathroom, the famous blue bottle of window cleaner might just be it. Windex can also be used to clean tiles and grout, without causing any damage.
LTP Porcelain Floor Tile Cleaner is especially formulated to clean porcelain and ceramic without damaging the grout or tile. Leaves the floor with a fresh clean fragrance. Suitable for use on both sealed and un-sealed, polished and unpolished surfaces.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.
While vinegar is safe to use on laminate, vinyl, porcelain, and ceramic tile, it is best to use it sparingly since the acid in the vinegar can dissolve the finish on your floor. Therefore, when you are using it on tiled floors, you want to make sure you cut it with water or rinse it completely with water.
Baking Soda For Stubborn Stains
Baking soda is an alkaline substance that can safely be used on its own or with a little water. For very stubborn stains, a paste of vinegar and baking soda works best. This will bubble and froth a bit, but don't fear- it's perfectly normal.
Bar Keepers Friend even removes food buildup and knife marks from porcelain, ceramic, glass dishes, and serving ware. From floor to ceiling, Bar Keepers Friend leaves your kitchen shining.
Begin by sweeping and vacuuming the area to remove dirt and debris, then dust-mopping the tile with a dry mop. Then use a hot water-dampened mop to loosen heavy soil before tackling stubborn stains with a heavy-duty cleanser. If you prefer something all-natural, stick to the vinegar-and-water mixture mentioned above.
The reason may be anything for your tiles to look dull or drab. It can be either grout discoloration or leftover soap or residue from all the different cleaning solutions used. If there is enough determination in us, we can get the old shine back to our porcelain tiles and make them as good as new.
For polished or glazed porcelain tile, wipe with hot water and scrub stains with a bristle brush. Wash with vinegar solution or a commercial tile cleaner diluted to half strength. Wash one more time with hot water to rinse off the cleaner, then dry with a clean towel.
Tile Glow #2 White (6 Lb) Natural, Non-Wax Compound for The Polishing of Most Unglazed Ceramic, Porcelain and Quarry Tiles, which Gives a Long Lasting Finish and Natural Shine to Tiles.
After cleaning and drying the porcelain sink, consider using lemon oil as a finishing polish. In addition to restoring the sheen to the porcelain surface, it also creates a protective barrier to further prevent stains. If you have scuffs and scratches, use baking soda and water to form a paste.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
Though popular for being gentler alternatives to harsh chemical cleaners, baking soda, Borax, and even salt can harm the finish of your porcelain fixtures. As gentle as they are, these compounds are still abrasive and will scratch your finish, especially with regular use.
You may have guessed where this is going: porcelain tiles are not waterproof, they are water resistant. That means that if you submerge them in water long enough, then they will eventually allow that water to seep through.