Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively. …
This 1600 psi 1.2 GPM electric pressure washer, as explained earlier, generates 1,600 Pounds Per Square Inch (which is in the recommended pressure range), and 1.2 Gallons Per Minute (ideal for washing cars, house exteriors, fences, garage floors, etc…).
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
For instance, a light layer of dirt or dust may only require a PSI of 1,500 to 2,000, while a thick layer of oil or grease may require a PSI of 3,500 or higher to remove.
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.
Medium Duty 2000-2800 PSI
This classification ranges from as low as 2,000 PSI to as high as 2,800 PSI. You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood.
The quick answer is yes, power washing can degrade a concrete surface.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively.
For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.
Simpson SuperPro Roll Cage 3600 PSI 2.5 GPM Gas
The best pressure washer for concrete and driveways is partly about combining mid-to-high-level PSI with excellent flow rates. As a professional, if you can score one that's easy to roll on and off the trailer multiple times a day, you're in business!
However, in general, a psi of 3000-4000 is commonly used for residential driveways.
LIGHT-DUTY pressure washers in the 1,300 to 1,700 PSI range are great for cleaning patio furniture, lawn equipment, stairs, and vehicles such as automobiles and small SUV's.
If your concrete has been newly poured, make sure to wait until it has fully cured. The curing process, if done correctly, typically takes around thirty days to properly dry and set to its full strength.
Powerful pressure washers with too much PSI will damage concrete when power washing. Most residential driveways require no more than 3000 to 3500 PSI for proper and thorough concrete washing. Heavy-duty commercial pressure washers and other power washing equipment are too strong for the average residential driveway!
An effective pressure wash cleans the pores of your concrete. Make sure to apply concrete sealer after pressure washing.
To clean concrete, exterior siding or an asphalt driveway, you'll want at least 2,000 to 2,800 psi and 2 to 3 gpm (4,000 to 8,400 ECUs).
The RYOBI 1800 PSI 1.2 GPM Electric Pressure Washer is the perfect powerful yet portable option to get the job done. This pressure washer is ideal for light duty applications like cleaning small driveways, sidewalks, decks, windows, patio furniture, campers, bikes, boats, and many other recreational applications.
Concrete comes in several different types with varying levels of strengths, compositions and applications. Compression testing is used to determine concrete strength, which is measured by PSI (pounds per square inch). Regular concrete has a PSI range of between 2,500 and 5,000.
Choosing a Pressure Washer
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi).
Your pressure washer should have a minimum pressure rating of 3000 psi to effectively clean your sidewalk. There are a few situations where a higher pressure rating might be needed, but exterior cleaning experts all agree and recommend that 3000 psi is appropriate for residential use.
A strength of 4,000 psi (pounds per square inch) after a one month cure is the industry minimum for concrete driveways, slabs, and sidewalks. However, 4,500 psi as the ideal. According to guidelines published by AsktheBuilder.com, a home foundation requires a thicker pour of 8-10 inches and a psi of 3,500-4,000.