If the refrigerator temperature doesn't budge, try cleaning around the appliance's compressor and any coils to remove dust and dirt, which prevent efficient cooling, Chai says. Check your owner's manual for the coil location and vacuum them with a soft-bristle brush.
There are several causes for a refrigerator that doesn't cool, including dirty condenser coils, poor ventilation, improper installation, faulty or dirty gasket seals, unorganized food storage, appliance location and malfunctioning internal parts.
Reset your refrigerator
Follow the instructions below depending on your model and what you would like to reset: Reset your refrigerator: First, unplug it (or turn off the power at the circuit breaker), and then wait about five minutes for the electrical charge to clear out of it. Then, power it back on again.
Unplug the refrigerator from the power outlet, wait for a few minutes, and then plug it back in. This can help reset the system and potentially resolve any temporary issues. Check for obstructions: Ensure that there are no items blocking the vents in the freezer compartment.
Its primary role is to maintain a consistent and ideal temperature, preventing food spoilage and optimal energy efficiency. The typical thermostat lifespan ranges from 5-10 years, though this can vary based on usage and maintenance.
Clear blocked air vents: Inspect the air vents inside the fridge and freezer compartments to ensure they are not obstructed by food or containers. Proper air circulation is vital for even cooling. Check the door seals: Inspect the rubber gaskets (door seals) around the refrigerator and freezer doors for damage.
Appliances do not have a reset button on them - to reset any appliance you UNPLUG the unit from the outlet for 3 minutes - plug back in - or turn off breaker to outlet and appliance for that long - then turn back on. That will reset the control computer board and reset the appliance.
Blocked vents: Overpacking your fridge can block the air vents, restricting the flow of cold air inside the unit and causing the temperature to rise. Malfunctioning components: Critical parts such as the thermostat, condenser coils or the evaporator fan can fail, leading to inadequate cooling.
If your fridge is not cooling but the light is on, your freezer may have an icy build-up. Unplugging your refrigerator may be a good troubleshooting move. The ice may be blocking a vent in the freezer that's preventing your refrigerator portion from properly cooling.
Compressor Won't Turn On Or Off
The thermostat automatically switches the compressor on if temperatures have got too high, and then kicks in to turn it off if the fridge gets to cold. If this automatic on/off function is not happening, the thermostat is probably faulty.
Refrigerator Repair Prices
A faulty thermostat may cost around R600 to fix, while a broken compressor can push the price above R3000.
Turn your thermostat “off”, then flip the related circuit breaker “off”. Wait 30 seconds, then turn the breaker back “on,” then the thermostat. Set the thermostat to hot or cold, whichever you prefer, and your desired temperature. This should effectively reset it.
Shutting off the power to the refrigerator will give all of its systems—including the compressor—time to reset. Power down your refrigerator by unplugging it from the wall or shutting off the circuit breaker connected to the fridge. Leave the unit unplugged for five to ten minutes.
Unplug your refrigerator
Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that's normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won't work.
Is it safe to unplug the refrigerator? The answer is no. The temperature of a refrigerator needs to be maintained at a certain level, and if you unplug it, the temperature inside drastically changes leading to many problems.