The main reasons your AC unit outside is not turning on could be something that has tripped the circuit breaker, something is blocking the fan's airflow, or the condensing unit is damaged. Other potential issues could be the thermostat isn't set correctly or the compressor could be malfunctioning.
Power issues: A tripped circuit breaker or blown fuse in your home's electrical system will prevent your AC from starting. Thermostat problems: Make sure you have your thermostat set to “cool” and the temperature is set below the current temperature in the room.
Make sure the outside unit is turned on (there's probably a switch near the unit). If the outside unit has a separate circuit breaker, check your circuit box and make sure it hasn't been tripped. A more serious issue if the outside air conditioning unit's not working is a broken compressor, capacitor or fan.
Common Reasons Why Your Air Conditioner is Not Turning On
Resetting your thermostat is often all that's necessary to get it working again. A tripped circuit breaker is another common reason why your AC won't turn on. Using too many appliances at once can trip the circuit breaker.
Press the reset button. Most models require you to hold the button down for 3-5 seconds before releasing. Restore power to your AC. Restore power to the unit at the circuit breaker, and make sure the unit is set to “on” and your thermostat is set to “cool.”
Check these issues when the unit won't kick on: Check the thermostat and adjust the settings if it isn't set to Cool and an appropriate temperature setting to call for cooling. Examine the house circuit breakers for the AC unit and reset any tripped breakers. Check the air filter and replace the filter if it's dirty.
Check the power source and make sure it is connected and turned on. Verify that the circuit breaker for the AC unit is not tripped. Make sure the thermostat is set to 'COOL' mode. Check the fan setting on the thermostat and ensure it is set to 'AUTO' rather than 'ON'.
Blowing the fuse cuts the power to the unit to prevent electrical damage. If your AC has shut down and won't start again, especially if you've noticed odd electrical behavior immediately before the shutdown, chances are the fuse has done its job and will need to be replaced.
It's a small, red button usually located on or around the unit. The button should have a clear 'reset' label. Once you find the button, press it for around three seconds and observe the AC. Check whether the AC kicks on immediately and if it doesn't, press the button again for another three seconds.
A sure sign of a bad AC capacitor is a humming sound from within the access panel. Any humming noises indicate a problem with the air conditioning system or the components of the AC unit. Try turning the power on and off again to see if it was a one-time issue with the motor or a recurring problem.
If you have a fuse box, look for signs of a blown fuse. Resetting a circuit breaker is easy to do yourself. However, if you reset the breaker and the outside AC unit is still not turning on but the inside is, it's time to call in an AC repair professional for help.
A tripped circuit breaker can be a major cause of why an outside AC unit isn't turning on. This occurs when the current is too high in the outdoor unit, causing the breaker in the fuse box or main electrical panel to switch off power to the unit, resulting in it not receiving any electricity.
Locate the breaker for your HVAC system, then flip it to the 'off' position. Wait a total of 30 seconds, then flip the breaker back to the 'on' position. Return to your thermostat, setting the mode to heat/cool and adjusting temperature settings, observing carefully for the flow of conditioned air.
Check your circuit breaker if your AC is not turning on. If the circuit breaker has tripped, you will need to reset it for the air conditioner to start working again. If your circuit breaker does trip, here's how to reset it: Locate your main circuit breaker and switch it back to the "On" position.
The short answer: Definitely not. (Unless you have manually engaged your outside fan to run constantly, but it shouldn't be running for hours on it's own.) If your HVAC is functioning correctly, it should keep your house cool by cycling on for 15-20 minutes at a time—with distinct pauses in between each cycle.
It could be your thermostat, your air filter, a problem with the condenser or compressor, or it may just be time to replace the unit, especially if it's over 10 years old.
Try checking the circuit breaker box or replacing the batteries. Bad wiring: The thermostat may be unresponsive if the wiring has gone bad. Remove the cover and check inside for loose, detached, or corroded wires. If you spot any problems, contact an HVAC technician for assistance.
So, can a bad thermostat cause your AC not to cool? Absolutely.
The main reasons your AC unit outside is not turning on could be something that has tripped the circuit breaker, something is blocking the fan's airflow, or the condensing unit is damaged. Other potential issues could be the thermostat isn't set correctly or the compressor could be malfunctioning.
Power down your AC: Turn off your AC unit and unplug it from the power source. This will ensure that you stay safe while working on the unit. Locate the reset button: Most air conditioning units have a reset button located near the outside unit. It is usually a small button located inside a small hole.
Yes, you should turn off your AC if it's not cooling.