Many sealers out there help with algae control, but not many of them uniquely target green algae. However, this product does exactly that and much more. You can expect this sealer to help discourage the growth of black and brown algae. Our sealer also stands out because of how long-lasting it is.
One of the keys to fungus and algae prevention on concrete is to control the flow and presence of water. For exterior surfaces, this is commonly achieved with a suitable design that uses gravity to channel the water flow away from the structure.
Sealing the surface means no water can ingress into the fabric of the paving material. This will prevent the access of water providing the conditions for mould, algae and fungi to thrive. An excellent method of sealing is to firstly apply a coat of a biocide such as Centrecoat GS36 followed by a surface sealer.
The other benefit to sealing concrete is improved cleaning and maintenance. Sealers prevent spills and debris from staining the surface and make it much easier to clean.
Before you spend your time and energy building or repairing a concrete surface you'll need to have the right sealer. Without a proper concrete sealer, mold and mildew can pop up shortly after you finish the project. Mold can be unsightly and may also be dangerous for people and animals around.
While the advantages outweigh the negatives, there are some disadvantages that you should keep in mind before sealing your concrete driveway. Sealant can make the surface slippery. Sealants tend to dry down with a glossy or semi-glossy sheen that can be quite slick, especially when wet.
By using a penetrating concrete sealer like the Siloxa-Tek 8500 mold, mildew and organic growth will be reduced and made easier to clean. The Siloxa-Tek 8500 is our favorite product to treat nearly any application.
Acrylic Concrete Sealers: Acrylic sealers last 1-3 years before they need to be re-coated. Epoxy Coatings: Epoxy coatings last 5-10 years before they need to be re-coated. Urethane Coatings: Urethane coatings last 5-10 years before they need to be re-coated.
One of the main benefits of sealing your driveway is that it will help protect the concrete from weather damage. Over time, exposure to the sun and rain can cause the concrete to crack and crumble. By sealing the concrete, you will create a barrier that will help prolong your driveway's life.
Many sealers out there help with algae control, but not many of them uniquely target green algae.
Use a mixture of water and white vinegar to spray down the area and kill the algae. Rinse the surface alga off the concrete with a water hose. Next, pour white vinegar directly on the surface and scrub using a brush. Use a vigorous back and forth motion.
Clean the area or surface regularly and use a specialist green stain remover, such as our Green Growth Remover, which helps prevents regrowth and delays it coming back. Good drainage and air circulation. Don't place your favourite pine wood planter in a dark, shady corner. Move your patio furniture around regularly.
Barley straw is a natural way to fight algae. On contact with water, the straw starts to break down, and as it does so it releases peroxides into the water which combat algae. Available in mini bales, or as a concentrated extract of barley straw liquid, it's a natural way of chemically fighting algae.
The green algae growth was influenced by both the type of cement and the type of fly ash used. The results show that any addition of classic fly ash increases the risk of green algae colonization on the surface of concrete. 1. Introduction Green algae and cyanobacteria require light, air humidity, and minerals to grow.
After discussing the factors you need to look for and the regional location of the project, in broad terms, Spring is in fact the best time of year to seal concrete. With its moderate temperatures and humidity levels, it tends to provide ideal conditions for the application and curing of sealers.
It's Never Too Late …
Sealing your garage floor might not be possible if you have moisture in your garage. This is typically the only scenario where we don't recommend sealing right away, mainly because you should deal with the cause of the moisture first. It could be due to a plumbing leak or a drainage issue.
If your concrete is new, you'll need to let it cure; wait at least one month before applying sealer. Before you apply it, check the weather. Sealer needs to be applied in dry conditions because it won't adhere to damp concrete.
The answer depends on the surface's square footage. For large surfaces such as commercial floors, a sprayer is faster and way more efficient. Finally, for small surfaces, such as garages or any other exterior surface, a paint roller or any other type of roller will do the trick. Rolling is a less expensive process.
Sealing your concrete isn't really a labor-intensive, nor costly, job. By sealing your concrete every 2-5 years, as recommended by experts, you should keep your floor in good shape, preventing cracks, pitting, and additional damage.
Leaving concrete unsealed will leave it with a flat look. The color will remain flatter and dull, in addition to the concrete remaining porous and easier to damage. Sealing the concrete will enhance the colors and give it more of a marble or mottled look, smoother and with richer colors.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
Preventing concrete mold
First, make sure there is no standing water collecting on your concrete patio, driveway, or walkway, as this is essentially a breeding ground for mold. Do your best to clear away any standing water and keep your concrete as dry as possible by using a mop to soak up water.
Then mix three-fourths to a cup of bleach with one gallon of water, and sponge it onto all the areas where you see the green stains. Keep sponging on more as needed so the concrete stays wet for five to 10 minutes. Scrub with a synthetic brush, then rinse thoroughly. Repeat the process if the concrete is still stained.