Concrete is porous and will absorb stains if not sealed. The sun and weather also can cause your paver color to fade. Sealants can protect paver color from fading and deteriorating. In Sarasota, the sun, salt, and water will quickly face and deteriorate your pavers, and cement.
Pavers should be sealed regularly to prevent the surface of the paver from deteriorating from traffic, UV rays and rain.
In order to keep your pavers from fading, it is important to seal them. Even the toughest of pavers don't stand a chance against the sun, with concrete even fading over time because of the UV rays.
Most experts agree that you should seal your pavers at least once every two years. However, if you live in an area with a lot of traffic or harsh weather conditions, you may need to seal them more frequently.
You're wondering what happens if you don't seal pavers. Your pavers won't disintegrate if you don't seal them, but they'll likely fade much sooner than if you applied sealant. You'll also need to clean them more often, and the stains won't be as easy to remove.
The average cost to clean and reseal pavers is around $400, and most paver sealing projects fall between $300 and $550.
Enhanced aesthetic: The paver sealer enhances the curb appeal of your properties and provides perfect finish to the paved areas and at the same time stabilizes the joint sand by locking it in place. It protects the pavement against harmful UV rays and prevents fading.
If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer. It is very important not to walk or drive on sealed pavers at least 24-48 hours after application. A protective sealer enhances the natural color and beauty of your pavers.
Pressure Washing: Start by having the whole area pressure washed before sealing pavers. Grime and dirt can inhibit the paver sealant from penetrating. As a result, the paver stones may start pitting, and discoloration can happen.
Yes, you can pressure wash your pavers. But while using a pressure washer at a basic level is simple, ignorant and inexperienced users can easily damage their pavers by using a stream that's too powerful, by holding the wand too close to the pavers, or by falling into any number of other rookie mistakes.
Power washing should not be used too often. Power washers are powerful machines that can clean even the most difficult stains. However, they can also remove the sand between the pavers, and sometimes even the sealing, so they need to be used only when it is time to re-sand and re-seal the installation.
After years of experience in the industry, we believe that the best paver sealer for Florida residents is a water-based sealer. It's easier to apply, less likely to have problems, and lasts just as long. Unless you have very specific reasons for wanting to use a solvent-based sealer, we recommend a water-based one.
To sum up, polymeric sand is a useful adhesive used under brick pavers to hold them in place. It's a long-lasting material that can last for up to 15 years if proper care is taken during the installation process.
The easiest test is by letting water sit on your pavers for about 20 minutes. If the water beads up on the surface and does not leave a stain, your sealant is still working, if it sinks into the paver, however, then a fresh coat of sealer is likely required.
After installation, the best time for sealing pavers is when the new pavers are dry and free of any dirt or debris. Most experts recommend waiting for at least 24 to 48 hours before sealing the new pavers after installation.
Using a nap roller for sealer application will take several times longer than using a paver sealer sprayer and joint stabilization is difficult to achieve. Spraying is the preferred method of applying water based paver sealers as it allows enough sealer to get into the joints.
While a thorough cleaning, sanding, and sealing process can significantly hinder weed growth and prevent them from taking over your paver system, it is important to understand that sealing alone cannot completely eradicate weeds.
A wet cast brick paver has a more dense and smooth finished surface. Sealing these with certain types of brick sealers will make them very slippery when wet.
Never Too Late to Seal Pavers
It's always best to seal soon after a new installation. But, our proven system of repairing, cleaning and sealing will also bring back the original luster to old, dirty and fading pavers. Sealing is the final step in a comprehensive process.
In some applications where the joints between the pavers are rather large (1/4″ or larger) we suggest using the polymeric sand over the joint stabilizing paver sealer because the polymeric sand tends to hold up better in larger joints.
Yes, pressure-washing pavers with polymeric sand are typically safe. In reality, pavers filled with polymeric sand can benefit significantly from pressure washing to keep them clean and well-maintained. There are, however, specific possible hazards associated that need to be taken into account.