A handheld snake has a 25-foot-long coiled wire, which is plenty long enough for most household clogs. A heavy-duty drain cleaning machine has a 50-foot reach if you need to go even further down the pipe to clear the blockage.
A drain snake is usually about 15 to 25 feet long. It should be inserted into the drain as far as possible in order to reach the clog, but be careful not to damage your pipes.
If the bottom of the pipe or fittings are missing this can cause the snake to catch and break the pipe. It can also cause the equipment to get stuck. Broken PVC pipe is another issue with drains. If PVC is installed correctly there is usually no issues.
Crank the Handle of the Drain Snake
When pushing the cable through the P-trap, the U-shaped pipe section under the sink, you may encounter some friction and resistance. If this happens, push on the cable while cranking the drain snake slowly. A couple of turns will help the cable maneuver through the bends in the pipe.
A hand crank enables a flexible cable to descend into your toilet and break up an obstruction. While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes.
While snaking is generally considered safe for your pipes, it can damage your pipes if they are in bad shape. Homes that have older pipes are more susceptible to this happening as hairline cracks and corrosion occur over time. Surprisingly, snaking your main line can potentially make the clog worse.
If your auger isn't unclogging a clog, it could be because: The old clog is still attached. Are you using a drain snake that has been used before? Make sure the old clog isn't embedded in the corkscrew end.
Tighten the Thumbscrew
If you hit an obstacle and the cable will not rotate, the thumbscrew likely needs to be tightened. A handle on the side of the snake drum has a place for you to insert a corkscrew and tighten the drain auger. Tighten the auger as much as you can before continuing to snake.
It would be best if you used the plunger on the toilet drain or a sink. First, ensure the plunger seals the drain completely, and then apply the plunger. This allows pressure from the plunger to remove the clog. You'll soon notice the reduced trapped water in the sink or toilet.
The extreme curves in a P-Trap make it very difficult to maneuver a hose through it - especially if there's a clog involved. The trick here is that instead of pushing the auger through - you should take the drain trap beneath the sink apart and THEN work in the drain snake from there.
Do you need a plumber to snake a drain? For more minor clogs, you can snake your own drain. However, for heavy-duty clogs or to reach a clog far into your home's plumbing system, you'll need a power auger. A trained plumber best uses this type of tool as untrained individuals can cause pipe damage.
Designed to clear different types of products, plumbers consider drain snakes tools that cater to smaller drains like your kitchen or bathroom sink. The drain snake takes care of pipes ranging from 1-1/4″ to 2″ in diameter. Conversely, drain augers tackle larger pipes like your toilet or shower drain.
Untrained individuals are more prone to cause harm to corroded pipes while using a drain snake. The snake's head may readily scratch the pipe's inside. This damage might soon become severe if your pipeline is already rusted. Incorrect snaking may potentially result in water leakage issues, since the pipe may rupture.
A handheld snake has a 25-foot-long coiled wire, which is plenty long enough for most household clogs. A heavy-duty drain cleaning machine has a 50-foot reach if you need to go even further down the pipe to clear the blockage.
Use a Simple Wire Hanger
This method is extremely effective when trying to remove hair clogs. All you do is take a wire coat hanger, straighten it out and make the end a hook. Take the hook, push it down the drain, wiggle it around a little, and you should catch the clog. Once it is caught, you can pull it out.
To snake your bathtub drain you will first need to remove the overflow plate on the tub. Behind the overflow plate, you can access the tub drain through the overflow tube. If the drain uses a lever-operated stopper, you will also need to remove the linkage running to the stopper mechanism.
It is not a great drain clog remover. Bleach has no effect in dissolving the common culprits of household drain clogs, like hair, food scraps and grease.
If the clog is a solid object, the auger head entangles the object. If you don't feel the auger breaking through and twisting getting easier, pull the auger out of the drain — you'll likely pull the clog out with it. Run water full force for a few minutes to be sure that the drain is unclogged.
Over time, the plumbing pipes get dirty and accumulate debris, slowly blocking the water flow. This buildup of slime in the drain is a notorious breeding ground for bacteria. As it grows, the biological matter creates black sludge in the drain.
Blast it out. Sometimes a hard burst of water can push out whatever is blocking your sink. Take a plastic milk bottle or 2-litre drink bottle, fill it with hot water, tip it upside down with the bottle hole against the plughole, and squeeze as hard as you can. The fast, directed flow of water may well fix the problem.
A manual drain snake, also known as a plumber's snake or a drain auger, is a small boring tool that rotates slowly as it's physically pushed through a stubborn clog. The terminal end of the device is a corkscrew-shaped hook that is fed into a clogged drain or toilet.