Pool Collapse – An above ground pool collapse is often caused by the results of ice damage, but it can also happen when there is too much snow accumulated on top of the pool and the frame cannot handle the weight.
Unfortunately, however, above-ground pools can collapse. Frames are usually constructed from corrugated sheet metal, and while it's strong, sheet metal can't always withstand the extra weight of several inches of melting snow and/or ice.
The quick answer is no. You don't need to drain your pool, as there is no risk to your pool by it being full. The only thing you lose with a pool filled to the rim is your skimmer's surface cleaning action. Overall, it still draws water and the equipment is just fine.
2018. A high-quality above ground pool from Valley Pool & Spa should last between 10 and 20 years depending on how well you care for it. However, your pool liner will not last as long as your pool. Contact a pool expert at our store to see if you need a new liner before you decide to replace your entire pool.
The market average life of an above ground pool may be shorter than you think at about 7-15 years. However, when you buy from a quality brand and maintain your pool properly it will last many years longer than that. After all, you can't expect much if you buy a piece of junk and let it rust in the yard.
Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.
Having an excessive amount of water added to your pool in a relatively short timeframe can lead to several problems, among them, malfunctioning of your pool equipment, the accumulation of algae and deck damage.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
The Problem With An Empty Pool
When that amount of weight and pressure is removed from the structure, the pool can actually pop out of the ground due to ground pressure forcing it up. This can compromise its structural integrity, damaging the walls, floor, liners, and even the deck itself.
Major Issues with an Unlevel Pool
The pool will twist, buckle, or even collapse, causing property damage and injury to anyone in or around the pool.
It could be because the filter is already loaded with dirt and needs a backwash first, or it could be that the hose is fatigued and hooking up the vacuum is enough restriction to collapse the hose. If the pool is clear you don't need to vacuum to waste, just vacuum to filter then backwash and rinse.
A sinkhole can occur whether you have an inground pool or an above-ground pool. A pool that is allowed to leak into the foundation underneath can lead to a very large, very dangerous sinkhole. In fact, leaking water is the main cause of a sinkhole. Sinkholes start developing a long time before they actually appear.
Remove the pool walls and the liner, based on the manufacturer's assembly directions. Once the wall is collapsed, it can't be repaired. Replacement is required.
Unlevel Intex pools may have one part of the pool lower than other parts, and this unevenly distributes pressure on your pool's walls. A part of your pool may have the highest weight due to it being on uneven ground. This will can cause your wall to collapse and leave permanent damage on your Intex pool.
Safety cover sagging is okay, well in most cases. It is not the safety-cover that supports the snow and ice. It is the water underneath your cover that helps it and keeps it from sagging too much. Whoever sold you the cover should have warned you or directed you to read the directions.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
Most pool professionals agree that the water level in both in-ground and above-ground pools should be at the midpoint of the pool skimmer. The skimmer is responsible for providing a pathway for water to flow to the filter where it is cleaned.
It is recommended you have your water level between one-third and one-half up the swimming pool skimmer box opening. If the level is higher than that, it may slow or even stop debris from being pulled into the skimmer box through the plate or valve.
On average, swimming pools lose about a quarter of an inch of water each day, yet variations in wind intensity, humidity and sunlight can drastically change water loss rates. Some of the strongest and most intense wind in the country can be found in mountainous regions.
WEEKLY ABOVE GROUND POOL MAINTENANCE:
Skim the surface, vacuum and fully brush the pool, in that order. Test total alkalinity, should be between 80-120 ppm. Clean the pool deck and surrounding areas, helps keep the pool clean. Add maintenance doses of algaecide, clarifier, metal control.