ABUS Granit™: one of the world's most secure padlocks with a tensile resistance of over six tonnes. Granit locks have a tensile resistance of over six tonnes, making it almost impossible for attackers to release the shackle from the lock body by force.
Pick-resistant locks have an extra set of tumblers or locking apparatus so that, in effect, the key has to do two things at once. Because of their resistance to manipulation, these locks are also resistant to key bumping. One of the most popular pick-resistant locks is the Medeco.
One of the most common (and easiest to pick) locks is the pin-and-tumbler, which is a type of cylinder lock. Cylinder locks are used in most deadbolts. When picking a pin-and-tumbler lock, put the tension wrench in the keyhole and turn it as if it was a key.
Strong Steel Construction
Steel alloys tend to give the strongest protection against bolt cutters. Boron alloy is one example of a material that's difficult to cut through. Hardened steel is also used in many locks and can make the lock more resistant to bolt cutters.
What Tools to Use to Cut Padlocks. Bolt cutters are the common tool of choice for to cut padlocks during forcible-entry. Unfortunately, most padlocks are made of case-hardened steel, which is very strong in comparison to the materials that bolt cutters were intended to cut.
Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.
Most Master Locks are very easy to pick and are considered one of the easiest beginner locks when practicing lock picking. They have 4 standard pins and a wide-open keyway that can be quickly bypassed in many ways including picking them with improvised tools such as paperclips, bobby pins, or even a chicken bone.
ABUS Granit™: one of the world's most secure padlocks with a tensile resistance of over six tonnes. Granit locks have a tensile resistance of over six tonnes, making it almost impossible for attackers to release the shackle from the lock body by force.
Deadbolt door locks are the most secure type of key lock and are usually used on a home's exterior door. Available in single- and double-cylinder styles, deadbolts are rated according to their strength from Grade 1 to Grade 3.
Dimple locks are basically pin-cylinders that use the flat side of the key's blade as the biting area. So rather than cutting into the edge of the key as in a standard pin-cylinder, dimple locks turn the key ninety degrees and cut onto the flat side.
- Generally, lock pick guns are simple to use and can perform the task quickly, efficiently and effectively. - While they're not a substitution for traditional lock picking tools, they work on most standard pin tumbler locks, but they shouldn't be used on anything more complex.
Try bolt cutters.
This will not work on most master locks, as they are made of case hardened steel.
To pick a master lock, you'd have to raise the pins up with a pick until you hear a click signifying that the pin reached the shear line; then rotate a screwdriver in the keyhole as if you were turning a key.
However, combination locks fall slightly short in this regard. They are comparatively easier to pick than keyed locks. It only has a combination of three or four numbers and there are a number of tools that professional thieves use to pick combination locks.
The "do not duplicate" label on door lock keys is often used to prevent unauthorized duplication of the keys by non-authorized personnel. This is done primarily for security purposes in order to protect homeowners or businesses who share key access with different people.
A bump key ( sometimes known as a bumper key, bumping keys, etc.) is a specially-designed tool that allows you to pick pin-tumbler locks - the world's most popular kind of locks. Normally, you would need a bump key set to be able to pick a wide variety of locks.
If you don't have a bump key you can also bump a lock using a lock picking technique called ranking. This can be accomplished using lock picks, or improvised tools such as bobby pins.
You can use a variety of tools to break the lock, including a Dremel and angle grinder. Alternatively, you can cut the lock open with a torch or cut it with a hacksaw. Some cheaper padlocks can be pounded or pried open with a hammer.
If you misplace your key or forget the combination to a lock, you may need to cut through the lock to get it back. Most steel locks can be opened by either using bolt cutters, an angle grinder, or a hacksaw.
Large bolt cutters, which can be as long as 48 inches, can handle hardened steel rods, heavy chains, and thick threaded cable up to 7/16 of an inch in diameter.
Are Dimple Keys More Secure Than Other Keys? Contrary to popular belief, dimple locks are neither more secure or less secure than other conventional pin tumbler locks. This impression might arise from the fact that dimple keys have dimples cut into the grooves while standard keys do not.