Traditional Pulls For base cabinets, the top screw of your pull will be placed between 2 ½ and 3 inches from the top corner of the cabinet (opposite the hinges) and the bottom screw will be placed at the other end of the pull. Pro-Tip: Pulls should be installed on the stiles of the doors.
When it comes to installing cabinet door handles (either knobs or pulls), they are always placed on the opposite side from the door hinges. You'll specifically want to place them anywhere between 1'' and 4'' from the top or bottom edge of the door.
Using a pull that is approximately 1/3 the length of the drawer is a good rule of thumb. When in between sizes, size up.
CUP HANDLES
' A cup handle is generally used on drawers, or cabinets that pull out such as a dishwasher, and would be placed central on the drawer and top centre on a pull out door. Should you have a wide pan drawer, you could use two cups per drawer, but usually this would be for drawers over 800 wide.
For drawers, the handle is usually placed in the center, while for doors, the handle is generally placed on the opposite side of the hinges. An exception is doors that open upwards, where the handle is placed in the middle of the door, along the edge to facilitate opening and closing.
Start by storing items as close as possible to their most frequent “point of use.” For example, place glassware near the sink and mugs near the coffee maker. Keep flatware, plates, and bowls in the drawers and cabinets nearest to the dishwasher to make unloading easier.
Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
If a drawer is wider than 24 inches, you will want two pulls. Each pull should be about 1/6 the size of the drawer width. So if you have a 36 inch drawer, then you would want two 6 inch pulls spaced out on the drawer front.
Cabinet pulls give a sleek visually appealing look to cabinet doors and drawers. What usually looks best is a pull length that is about 1/3 the height of the cabinet door and 1/3 the width of the cabinet drawer.
Matte black kitchen hardware remains a top choice for 2024, continuing to dominate as a versatile and sophisticated option for modern kitchens. This sleek finish adds a touch of elegance that pairs beautifully with various cabinet colors and styles, and offers the perfect balance of boldness and refinement.
The 1/3 rule in cabinet hardware is a design guideline that helps achieve balanced proportions when selecting drawer pulls and cabinet handles. According to this rule, the length of the pull should be approximately one-third the width of the drawer or cabinet door.
Pulls are generally considered more modern than knobs, especially when they are sleek and linear. Options like chrome cabinet pulls, gold bar pulls, and modern brushed brass cabinet pulls create a streamlined, contemporary look that suits modern and transitional kitchen designs.
For really wide drawers, we always recommend using two cup pulls, and then evenly space them. As a general rule of thumb, if your drawer is 30″ or wider, I like to use two cup pulls. Lastly, if you have tall drawers, you can either center them in the overall drawer, or install them on the top rail.
The traditional approach typically involves centred handle placement on the inset panel, about 2.5 inches from the bottom of the cabinet door. This classic placement creates a sense of balance and time-honoured elegance within the kitchen.
Traditional Pulls
For base cabinets, the top screw of your pull will be placed between 2 ½ and 3 inches from the top corner of the cabinet (opposite the hinges) and the bottom screw will be placed at the other end of the pull. Pro-Tip: Pulls should be installed on the stiles of the doors.
Upper Cabinets: knobs or pulls should be about 2.5 to 3 inches from the bottom edge of the door or drawer. Lower Cabinets: hardware is typically placed between 2.5 to 3 inches from the top edge. Drawers: center the cabinet pull or knob horizontally on the face.
On cabinet doors pulls are typically installed in a vertical position with the bottom hardware hole 2 to 3 inches from the bottom of the door front. Center the pull on the stile or frame of the door.
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
Cup bin pulls are a great option for kitchen cabinets. They have a timeless look that can complement a variety of decor styles, they are easy to grip and use. If you're looking to update the hardware on your kitchen cabinets, consider using cup bin pulls for a simple and classic look.
And if you're wondering, “How do I decide where to put things in my kitchen?,” here's a good rule of thumb for using cabinet space effectively: Upper cabinets: food, spices, glassware, dishes. Lower cabinets: larger serving pieces, small kitchen appliances, pots, pans, mixing bowls, baking sheets, cutting boards.
However, for mugs and every day glasses storing them upside down does offer a little bit more hygiene, especially if you dry them out properly; this can save time in a work environment, meaning you don't have to rinse out the glass for any dust or dirt that may have accumulated before using it.
Keeping pots and pans above the stove makes them easier to access when cooking, plus it frees up room in your cabinets and drawers. "In addition to giving your kitchen an aesthetic appeal, hanging your cookware makes them visible and accessible, allowing for you to quickly grab the right one," says Goforth.