In most Frigidaire models, including the Frigidaire Gallery and Professional series, you'll find the drain hole at the bottom of the back wall, often behind the bottom drawer or shelf.
Locate the Drain Tube: Typically, the drain tube is found at the back of the fridge or freezer compartment.
Use a hair dryer to thaw all the ice out if there is any and locate the drain hole. Pour hot water down the drain hole until it's draining properly again. Once it's draining properly blow compressed air down to make sure it's clear.
Where to find your fridge's drain hole. When condensation forms in your fridge, that water runs down the drain hole into a tray at the bottom of the appliance. The hole is usually behind the salad drawers, though this varies depending on your fridge's make and model.
Locate the drain hole directly in the middle toward the back under the refrigerator. It's a 1" round tube. You need to remove this tube and clear it out, and then blow compressed air up through the tube that goes through the back wall.
On most modern refrigerators the drain tube and hole are usually located inside the refrigerator at the bottom in the back. To protect the hole, there may be a panel made from plastic that can be removed with a screwdriver. Once it is removed you'll be able to see the drain tube and drain hole.
If water appears on the floor in front of the Refrigerator once or twice a day, it could be due to a clog in the defrost drain tube. The usual evidence of a clogged drain in a Side-by-Side Refrigerator is ice under the bottom basket in the freezer compartment in addition to a puddle of water on the floor.
Fridges typically have a condensation drain to manage moisture. If this drain becomes clogged, it can result in water pooling at the bottom of the fridge or even on your kitchen floor.
It is usually found as a small opening that is located at the back of your fridge's freezer compartment, normally behind the salad drawers. However, the location may vary for different fridges and it's advisable to consult your fridge's user manual if you aren't sure of where it is located.
Its primary function is to allow water generated from defrosting to drain out of the fridge and into the drain pan. When the drain hole becomes clogged, water can accumulate inside the fridge, potentially causing leaks and affecting cooling performance.
This is the number 1 most common issue in a leak situation. If your fridge has water pooling at the bottom, the defrost tube is your MOST likely suspect. Your defrost tube is what carries the water all the way down to the drain pan where it eventually evaporates.
Water leaking inside your fridge is usually due to excess condensation or a minor blockage. Sometimes, it might be a leaking container or a sign to clean your fridge and water dispenser. Although a minor concern, excess water in the refrigerator can be annoying.
As there is around 200mm left at the top of the fridge/freezer when fitted, there is theoretically space up there for a plug socket to be installed before you fit the kitchen, or in fact at the bottom where the 150mm legs push the unit up.
Most refrigerator models have the defrost drain on the inside back of your freezer, so finding it shouldn't be too difficult. Once you find the drain, look and see if there is anything blocking the drain, like frozen meals, ice build-up, etc., and if there is, simply move them out of the way to allow proper airflow.
The drain hole can be found on the back wall of the of the fridge. Clearing the hole should just need a couple of pokes with the small plunger (this should be kept in the hole). If the issue is still not resolved, the blockage may just be a bit further down. Use a pipe cleaner in order to reach any deeper blockages.
Fridge temperature settings are generally numbered from 1 to 5, with 5 being the coldest. A fully stocked fridge may need to be set to a higher setting (around 3 or 4), whereas one with more space is best suited to temperature setting 2 or 3.
Most modern fridges have a drain hole that stops condensation pooling at the bottom. It's usually behind the salad or crisper drawer. But if your fridge is a few years old, it might not have this feature.
Use a hair dryer to thaw all the ice out and locate the drain hole. Pour hot water down the drain hole until it's draining properly again. Once it's draining properly blow compressed air down to make sure it's clear.
Remove the food and any crisper drawers. Mop up any excess water and remove the drain hole cover if yours has one. Use the unblock tool that came with your fridge (or else a pipe cleaner, straw or cotton bud) to remove the food and debris build-up. Replace the cover and turn your fridge back on.
If water is leaking from the bottom of the refrigerator, then this could be due to the overflow of the drain tray. Check the drain tray to see if the water drain tray is filled with water. If it is, this indicates that the automatic evaporation of water has failed.