Bleach contains about 5% to 6% sodium hypochlorite, which means roughly 95% of your jug of bleach won't do anything useful to clean your pool. Some bleach formulations may include colorings and fragrances, which can negatively affect the quality of your pool water.
WADING POOL DISINFECTION
When chlorinating wading pools, use 1/8 cup per 100 gallons of new water. Mix required amount of Clorox® Regular Bleach2 with 2 gallons of water and scatter over surface of pool. Mix uniformly with pool water. Empty small pools daily.
Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.
You can also simply add more chlorine, and pouring household bleach into the pool is one way to do this. Be sure the pH is in the proper range -- between 7.2 and 7.8 -- and add the bleach in the early evening to avoid having most of it degraded by sunlight.
High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.
It is a good idea to wait at least 20 minutes after adding the water balancing chemicals. If you use calcium chloride in your pool, you should wait at least 2 hours to swim.
Chlorine is a natural element and an ingredient of bleach, while bleach is a solution and the product of combining chlorine and other chemicals. 2. Chlorine exists in nature, while bleach is a manufactured product.
What can you use instead? Bromine — considered a safe substitute for chlorine. Looks for BCDMH tablets, which are typically 66% bromine and 27% chlorine. If unable to find, you can use just bromine but it may leave the water a dull green color.
Potassium peroxymonosulfate: A less costly, non-chlorine shock. Add it directly to your pool water at any time. Takes roughly 15 minutes to work before you can safely swim.
Chlorinating Liquid is a popular choice among pool owners and can be used as a substitute when chlorinating tablets may be unavailable. Chlorinating liquid is not stabilized, which means it may require a chlorine stabilizer to help the chlorine last longer.
Clorox is considered to be the most common bleach product that is used for pools. It has a 5.7% concentration, so if you have a 5,000-gallon pool, you will be using 3 cups or 24 oz to raise the chlorine levels.
Answer: It is true that pool chlorine is stronger than bleach. For bleach and water to be the same strength as pool chlorine and water, you would have to adjust the ratio, increasing the bleach and reducing the water. But no matter which chlorine you use, make sure to test a small area before doing the job.
Of course, too much chlorine in pool water can be dangerous. Exposure to over-chlorination can provoke asthma, lung irritation, and potentially skin and eye irritation. As well as being potentially bad for you, it's bad for your pool.
At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than Clorox bleach. The recommends 5 tablespoons of regular bleach per gallon of water to properly disinfect a surface. When using liquid pool shock, dilute it at a rate of 2.5 to 3 tablespoons per gallon of water.
In truth, bleach contains the same base chemical as pool chlorine. That chemical is, of course, chlorine, and the only major difference between the two products is the concentration strength. Pool chlorine typically contains some form of stabilizer, as well, though this is not a crucial factor.
A Clean Pool: Chlorine vs. Bleach. Typical pool chlorine is actually a chemical compound made up of 65% calcium hypochlorite with the remaining 35% made up of calcium and other inert ingredients. Household bleach, on the other hand, is usually only 6% chlorine and a different type at that.
To mix chlorine bleach combine 5.25 percent sodium hypochlorite and 94.75 percent water. To mix non-chlorine bleach, combine equal parts hydrogen peroxide and water. Pour mixture into the plastic container, and secure tightly. Shake to mix ingredients.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.
Green algae, unlike its black counterpart, is a true algae; it isn't resistant to chlorine, so you can control it by shocking the pool. If you don't want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.
Chlorine. Chlorine is by far the most commonly used swimming pool sanitization agent. The goal of adding chlorine to a pool is simple: kill microorganisms such as bacteria and algae. A pool with excessive bacteria and algae is cloudy and unsafe to swim in.
Sanitizers are used to kill bacteria and inhibit the growth of viruses, algae and other organic contaminants that enter your pool water by way of wind, rain, dust and swimmers. The most common pool water sanitizer is chlorine.
Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.
Common unscented household bleach (sodium hypochlorite) works well to shock a pool.
A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.