DO not use CLR on natural stone or marble, terrazzo, colored grout, painted or metallic glazed surfaces, plastic laminates, Formica, aluminum, steam irons, leaded crystal, refinished tubs or any damaged or cracked surface. CLR may etch older sinks, tubs and tiles. CLR is corrosive.
Vinegar is a weak (acetic) acid that will cut the lime deposits, but not very quickly. CLR is a strong (lactic) acid with a few other ingredients that help it do a much better job on lime deposits. I don't know what its environmental impact is, compared to vinegar.
Versatile cleaner for use on plastic, ceramic tile, glass, stainless steel, faucet and shower fixtures, shower doors, fiberglass, toilet bowls & sinks. Part of the EPA's Safer Choice Program recognizing the product as a safer alternative to harsh chemicals without sacrificing the quality or product performance.
Can I use CLR to clean chrome? CLR can in fact be used to clean chrome and stainless steel. However, it shouldn't be used on any other metals, especially polished metals. Polished metals often have a nickel coating, and CLR can destroy or compromise the finish.
If CLR Grease & Oil Remover is left on a surface for too long it begins to dry and can be very difficult to remove.
Use in a well ventilated area. To use CLR Metal Clear, wearing rubber gloves, dip a damp cloth or sponge into the solution, rub briskly over the area you are cleaning, let it soak for two to three minutes and then rinse with cold water.
Is CLR Safe For PVC Pipes? CLR products are safe for all pvc products. It is also safe for copper plumbing and septic tanks. The materials to avoid using CLR on are painted surfaces, aluminum, etched glass, Formica, colored grout, natural stone, brass and copper.
By the time it reaches the septic system it is neutralized with water.
If your chrome is suffering from limescale buildup, vinegar is the best product to remove it, says Hill. Submerge smaller items in vinegar or saturated paper towels in vinegar and allow them to sit on your chrome, repeating the process until the entire surface is covered.
Over time your toilet water can cause an unsightly rainbow of stains and mineral build up in your toilet bowl. CLR Calcium, Lime & Rust Remover helps you flush the filth away. Before you get started, always use gloves and check if CLR is suitable to be applied on the material you are trying to clean.
Customers say the Zep Calcium, Lime, and Rust Stain Remover is an effective and cost-efficient alternative to more expensive brands like CLR. Many users appreciate its ability to tackle tough stains, particularly in toilets and on various surfaces affected by hard water.
Inhalation: Ingestion: May cause irritation with discomfort or rash, prolonged skin contact may cause ulceration Excessive inhalation may cause irritation of the respiratory passages May cause irritation of the gastrointestinal tract with abdominal pain, nausea, vomiting and diarrhea and corrosion of the mucous ...
Final Verdict. The best overall hard water stain remover is CLR Brilliant Bath Foaming Action Cleaner.
Vinegar and Baking Powder:
Baking powder can work wonders with rust. It makes an effective paste mixed with vinegar. Rub the paste onto the rust spots and leave to work for at least 30 minutes. Rinse off with warm water.
Mix 50/50 solution of CLR with water in a bowl. Submerge the faucet or shower head in the solution for 2 to 3 minutes.
Don't use an abrasive sponge, as it can scratch the chrome (one of many bathroom cleaning mistakes). Then repeat with a damp cloth to rinse.
Is WD-40 good for cleaning chrome? Yes, you can use WD-40 to clean chrome. This product can also be a great home hack when you want to add shine to chrome surfaces.
Muriatic acid, which is also called hydrochloric acid, is some pretty heavy-duty stuff. It's a good CLR alternative, and it can clean up rust and limescale super fast - but you've got to be really careful with it because it's seriously corrosive.
This paste is excellent for removing rust from iron, steel, aluminium and other metals. However, please don't leave it on any surface for too long, as vinegar can erode it, weakening the metal and making it more susceptible to rusting.
The most common reason for calcium build-up is hard-to-tap water. Hard water contains an abundance of minerals, causing it to leave a residue in pipes and drains.
That could lead to clogging over time, which must be avoided altogether. You can only flush down hot water and soap liquid in your drain opening. That would prevent rust from building up as water will not accumulate anywhere.
In fact, it could damage your toilet if it's left too long - especially overnight. You should only let it sit for just two to five minutes, depending on how bad the buildup is.