R1234yf was chosen to replace R134a in all new cars by 2021. Some manufacturers have already made the switch, or the switch is in progress. In fact, as of 2018, 70% of new Kia cars already come equipped with R1234yf!
A High-Performing Alternative to R-134a
Opteon™ XL10 (R-1234yf) refrigerant is a non-ozone depleting (ODP) hydrofluoroolefin (HFO) option that meets the industry's growing demands for sustainable, safe, and effective solutions.
R513A was developed as a replacement refrigerant for R134a. R513A is a modern, non-flammable refrigerant designed to replace R134a in a wide range of applications. It provides a sustainable solution for both new systems and retrofits.
No, you would not replace R134a with R-1234yf for any real reason.
R-1234yf refrigerant. To date, most auto manufacturers are using the hydro fluoro olefin (HFO) refrigerant R-1234yf as the replacement of choice for R134a.
According to its manufacturer, Chemours, use of R-1234yf has grown so much since the refrigerant replaced the long-established R-134a that it's now used in 95% of new cars sold in the U.S. An estimated 220 million cars on global roads are also using it.
Possible alternatives to R-134a
Attention is increasingly focused on low-GWP refrigerants that are hydrofluoroolefins (HFO). R-1234yf in particular is often seen as a possible alternative to R-134a. The GWP value of R-1234yf is 4, which means it has a very low global warming potential.
Still, the answer is an emphatic, “No.” Not only would a retrofit of this type negate the environmental benefits of R-1234yf, but it would also be a violation of Federal Law under Section 203 of the Clean Air Act: “tampering” with a vehicle's emissions control device.
The AIM Act is a Federal nationwide rule phasing out the use of global warming materials. As part of that effort, EPA is now banning the use of 134a in aerosol products as of 1/1/2025. There are excepted products that are allowed to use 134a until 1/1/2028.
In the United States, vehicles produced after 2021 no longer contain R-134A in the air conditioning system. In other parts of the world, including the United States, there are restrictions around using 1,1,1,2-tetrafluoroethane. Specifically, in California, retailers can deny selling customers canned R-134a.
The chemical stabilities of copper, steel, and aluminum have been tested and confirmed as acceptable for use with Freon™ 134a and lubricants. Acceptable plastics and elastomers have been found for use with existing CFC refrigerants.
HFC-134a will no longer be allowed in nonroad vehicles as of January 1, 2028. Servicing of existing vehicles using HFC-134a with HFC-134a will not be impacted and will continue to be allowed.
With the scientific approach to reduce the global warming potential (GWP) of the refrigerant R-134A (i.e. 1430), the refrigerant R-513A with GWP of 631 is the drop-in replacement.
Some notable substitutes for R134a [10] in AAC based on the preceding studies are R1234yf [[11], [12], [13], [14]], R1234z (E) [[15], [16], [17]], R152a [[18], [19], [20]], R290 [21,22], R744 [[23], [24], [25]], R430A [26,27], and R444A [28], etc.
R-1234yf systems that control freeze protection by pressure may encounter loss of cooling performance if charged with 100% R-134a. This is due to the requirement of R-134a to have a lower setting of 3.3 psig to achieve freeze protection at 32 F. This may result in a 4-degree F.
In most cars that are on the road today, R134a refrigerant makes the A/C system blow cold on hot days. Selected for its low flammability and safety, as well as because it's kinder to the environment, almost every car built since 1994 is equipped with R134 refrigerant. However, kinder is the key word.
R-1234yf refrigerant. To date, most auto manufacturers are using the hydro fluoro olefin (HFO) refrigerant R-1234yf as the replacement of choice for R134a.
It was used for so long that most people simply refer to any refrigerant as "freon." In fact, the word Freon is one type of product, a hydrochlorofluorocarbon (HCFC) compound known by industry experts as R-22. The EPA began phasing out HCFCs in 2010 and officially banned their production and import in 2020.
Adapters to convert an R-134a manifold gauge set to be able to connect to an R-1234yf system are readily available, so along with eventual availability of a recovery-only machine, the opportunity to convert an R-134a system to R-1234yf exists.
Most vehicles have a label or sticker under the hood that indicate whether the refrigerant used is R-134a or R-1234yf.
It is anticipated that by 2025 all vehicles will contain 1234YF. Don't fret, however, if your current vehicle requires 134a. Though 134a is not compatible with 1234YF and is expected to be phased out, it is still in production and will continue as long as there is a demand for repair of older vehicles.
The same two refrigerants and 19 others are being listed as unacceptable in new cold storage warehouses from January 1, 2023. The banning of R134a, along with 27 other refrigerants, in new domestic refrigerators and freezers from January 1, 2021, is expected to open the way for the use of hydrocarbon refrigerants.
R32 and R152a have a reduced global warming potential than R134a, which indicates that R32 can be used as substitute for R134a in refrigeration systems.
Also, substitutions are often not without problems. For example, when replacing R22 with R134a, there are many problems that cannot be replaced directly; the cooling power of R134a is 60% lower than that of R22, which means that the condenser of the system must work overtime to achieve the same cooling capacity.