Here's how to clean jewelry with it: Soak your pure silver bracelets, rings, and other jewelry in a mixture of 1/2 cup white vinegar and 2 tablespoons baking soda for two to three hours. Rinse them under cold water and dry thoroughly with a soft cloth. Did you know you can also use vinegar in your laundry?
Fill one bowl with hot water and add dish soap. Fill the other bowl with cool water to rinse. Mix the soapy warm water with the toothbrush and gently scrub the ring, paying close attention to crevices where dirt can collect. Let the ring soak in the warm water for about 15-30 minutes.
A: Yes, cleaning jewelry with baking soda and vinegar is pretty simple. Mix 1/2 cup vinegar and two tablespoons of baking soda in a small bowl. Allow your jewelry to soak in the white vinegar and baking soda solution for a few hours.
Can you use hydrogen peroxide to clean jewelry? Absolutely! Fill a small bowl with hydrogen peroxide—just enough to fully cover the piece you wish to clean. The solution will kill all the bacteria that may be on the surface.
Hydrogen peroxide is also an excellent cleaner, and it has the added benefit of being antibacterial. Place your ring in the solution and leave it to soak for 10 to 15 minutes. Remove stuck on dirt or particles with a soft bristle brush and rinse thoroughly in warm water.
Dawn dish soap is safe and effective at cleaning jewelry. Just add a few drops to a warm basin of water and let your jewelry soak for 15-30 minutes. Then remove it from the basin and gently brush with a clean, soft-bristled toothbrush to get grime out of the grooves. Finally, rinse and dry.
Dish Detergent & Warm Water
The best homemade jewelry cleaning solution is a mixture of a few drops of Dawn dish detergent in warm, not hot, water.
You should avoid harsh chemicals such as hydrogen peroxide, bleach and acetone, as these can break down the base metal in your ring and compromise the structure.
Ultrasonic cleaners are often used in jewellers to professionally clean diamonds, therefore is a popular choice for cleaning diamond engagement rings that have become dull over time. Take your ring into your local jewellers and let the ultrasonic cleaner work its magic.
Steps for Cleaning Your Diamond Ring with Windex:
Spray Windex on the ring inside the bowl generously and allow it to sit for about one minute. Using a toothbrush, scrub the ring thoroughly, focusing on the surface and around where it is attached to the metal.
Place salt, soda, and dishwashing liquid into bowl. Place jewelry on top of foil and let it sit for 5 to 10 minutes. Rinse jewelry in cool water and dry jewelry completely with soft cloth.
Mix one tablespoon of lemon juice with half a cup of water and dry instant milk. Let your ring soak overnight, and it'll be sparkling clean the next morning.
Ultrasonic cleaners are used to remove heavy dirt and grime, but could cause damage depending on the stone, treatment or setting. It's best to have your jeweler clean your jewelry using these machines to avoid any damage.
Fill a microwave dish with roughly two-cups of Windex. Add a few drops of dish soap. Without a lid, microwave the solution for one-minute without your jewelry inside. Remove and add your rings and allow to soak.
The short answer is no. Toothpaste is not a good option for cleaning your ring. Toothpaste contains scrubbing particles to polish your teeth, but these particles are often harder than the metals in your ring, especially gold or white gold. Using toothpaste on your jewelry could cause scratches or pitting in the metal.
For a quick cleaning solution for gold and diamond jewelry, try a little isopropyl alcohol. You can fill a small container with some alcohol and drop your jewelry directly into the solution. Let it soak briefly and then remove the item. The nice thing about alcohol is that it will dry clear.
It's really simple. Add about 1/4 cup glass cleaner and 3-6 drops of dish soap into your glass bowl. Stick the bowl in the microwave MINUS THE LID AND JEWELRY for one minute. (This gets HOT QUICKLY so be careful taking it out of the microwave).
While they won't damage your diamond, they can damage your gold. Windex won't hurt your ring, but it isn't a great cleaner either. So stick to mild soap and water, and six-month cleanings and check-ups at your jeweler. A gemologist can also appraise your ring so that you can insure it.
The best way to clean your diamond jewelry and restore its sparkle is to: Spray a soft-bristled toothbrush with Windex and gently brush diamond jewelry thoroughly, removing any dirt on the surface of the diamond or dirt that has settled in and around the metal.
Sanitary and sparkly: Windex and Hydrogen Peroxide
A caveat to this method is that it is not recommended for vintage diamond rings or rings with colored stones, porous stones or treated gems. For these rings, it's safest to stick with the soap and water method.