Kelda showers typically save around 50% – 60% of water and energy compared to conventional showers. Using innovative Air-Powered™ technology Kelda sets the new standard in high-efficiency showers – helping lower carbon emissions and running costs.
When it comes to Shower Heads, you'll typically find 2.5 GPM, 2.0 GPM, 1.8 GPM and 1.5 GPM. If you're looking for the most pressure, go for the 2.5 GPM Flow Rate, unless you are restricted because you reside in California, Colorado or New York. Again, this has been the Maximum Flow Rate since 1992.
Water-saving shower heads – also called low-flow shower heads – restrict the water flow, without making it feel like you're standing under a trickle of water. These days, they come in a range of styles and sizes to suit all bathroom aesthetics.
Since these shower heads mix the water with the surrounding air, it can cause the water to cool down quickly. There can also be a delay in warming the water, so a fast shower might not be as satisfying.
The largest use of household water is to flush the toilet, followed by taking showers and baths.
Saving Water Saves Money
With a low-flow showerhead, 175 minutes of showering uses just 262 gallons of water. Which means you save about 60 percent every month. Translate that to yearly figures, and a 1.5 gpm showerhead uses just over 3,100 gallons of water versus over 5,200 with a 2.5 gpm model.
Nebia uses 70 percent less water than a traditional showerhead. Could this be the most eco-friendly showerhead ever made? Nebia, a San Francisco–based start-up has devised a unique shower system that implements atomizing technology, turning the water into a fine mist.
Low budget options include solid surface, fiberglass, PVC laminate, and acrylic, while glass, marble, granite, and natural stone tiles are premium shower wall materials.
Square shower heads work best in contemporary bathrooms with angular elements, such as a square bathtub. Round shower heads tend to complement traditional bathroom styles. Ultimately, it's your choice, but these are things to consider when making your decision.
Rain shower heads don't actually use more water than standard shower heads. However, you might prefer not to invest in a rain shower head if you live in an area where water costs are notably high.
Standard shower heads use 2.5 gpm, but to earn the WaterSense label, a product must use no more than 2 gpm and still meet strict performance requirements. The EPA estimates that the average family could save 2,900 gallons of water per year by installing a WaterSense-labeled shower head.
Since 1992, a maximum of 2.5 GPM is the federally mandated flow rate for new shower heads. This means no more than 2.5 gallons of water should flow out each minute. The GPM flow rate for shower heads has decreased over time.
Efficient shower heads use at least 1.5gpm. Taking the same amount of time in the shower uses only 15 gallons of water. The water savings amount up to 65 gallons of water!
8 minutes of showering uses up to 80 liters (~21 gallons) of water! It's even worse if you use a bathing tub, which uses 160 liters of water per bath on an average. On the other hand, a bucket uses less than one-fourth of that! One bucket uses only 18 liters (~5 gallons) of water on average.
Also, cutting our showers to just 5 minutes could save our region nearly 200m litres of water every day - that's like leaving the tap running for 60 years.
While it is possible to remove flow restrictors from shower heads, we strongly advise against it for several reasons. Flow restrictors for faucets are an integral part of most aerators and it is generally not possible or desirable to remove them.
Because they're so much bigger than the average showerhead, but still provide the same amount of water (which can vary by water-saving mandate depending on where you live), it's just math: The same amount of water delivered across a bigger surface = less pressure.
The main benefit of an eco showerhead is that you'll use less water, which is better for the planet and can also help lower your bills. Plus, swapping your existing showerhead for an eco model is easy, providing your shower is compatible.
The #1 water waster in your home is the toilet.
A leaking toilet can waste 15,000 gallons of water a month. To check if your toilet has a leak, place several drops of food coloring in the toilet tank. If the color seeps into the toilet bowl within 30 minutes without flushing, your toilet has a leak.
Here's a breakdown of the biggest energy use categories in the typical home: Air conditioning and heating: 46 percent. Water heating: 14 percent. Appliances: 13 percent.