The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
Total Key Control
Thanks to the two-cylinder Key Control Deadbolt with SmartKey Security, you can have one master key for all your units and unique keys for all of your tenants.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps. Note: If the lock is muted, you will not hear the lock beeping. Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4.
Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.
You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset. A User Code is used to unlock the door while a Mastercode is a password for making changes to the lock features. Interior of door You will reset your User Code to 1-2-3-4 and Mastercode to 0-0-0-0 when the reset is complete.
What is the Difference Between a Master Code and a Normal User Code? The difference between a master code and a normal user code is that a master code can change itself and also add, edit, or delete normal user codes.
Master code: The Master code is the highest level of access in a digital lock. It is typically used to program the lock, add or delete user codes, and change the lock's settings. The Master code is usually only known by the safe's owner or an authorized security manager.
Make sure the User Code is correct and that the Kwikset button is pushed after entering the User Code. If the door still won't unlock, use a key to unlock the door. Call technical support for further troubleshooting.
Press and HOLD Program button until keypad flashes green (about 5 seconds). Enter new mastercode. Press Lock button once. Re-enter mastercode.
Two possible issues: The lock was not removed completely from another network before being paired with the new network. Follow your smart home system's instructions to remove (exclude/unpair) the device from any other network. Then, attempt to pair (add/include) the lock again.
Occasionally, someone will want the locks they use in their institution, organization etc. to have “mastered” locks. This means that although all the individual locks have individual keys, there's also a “master” key that will open them all.
No. Without the key number, there is no way for Master Lock to know which key will open your lock. There is not a master key that will open all Master Lock products.
How Many Guests Can I “Invite” to access my Premis lock? You can invite up to fifteen(15) Apple HomeKit to access your Premis lock through the Home app. You can also provide up to 30 user access codes using the Premis App.
For example, if you want to program User Code 2, press the program button twice. Many Kwikset locks hold 4 User Codes, but some hold as many as 30 at once. The program button is a small black button in the battery compartment of the lock.
The Deadbolt Does Not Lock The Door And Kevo Convert Beeps/Lights Up Red. This is a 'bolt jam' alert. It means that Kevo Convert was unable to extend the deadbolt and your door was not locked. This happens when the door was not shut properly and the deadbolt could not fully extend into the strike hole.
You can identity the type of Kwikset lock you have by locating a small vertical slot on the plug. This is located to the left of the cylinder's keyway. Conventional pin tumbler locks will not have these slots.
A master code is a barcode which is programmed into a scanner as a reference code for comparison with scanned codes.
If your lock does provide a serial number, the easiest way to retrieve your combination is to take your lock to any local Master Lock Distributor in your area; think of Wal-Mart, Home Depot, Lowes, etc.
These master code lists include all the possible values for select data, but due to the number of possible values, they are stored separately from the standard data dictionary. They are useful when extracting data through the Export Manager and Report Manager.