For cleaning and sanitizing, the CDC recommends a dilution of one cup of bleach to five gallons of water. Diluting bleach decreases the alkalinity and is safe for regular use on all types of porcelain and ceramic tile surfaces.
Put a cup of hydrogen peroxide in a spray bottle. Spray evenly over the porcelain. Let the hydrogen peroxide sit for 15 minutes to an hour. Rinse and buff with a microfiber cloth for a clean, bright shine.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
That being said, non-abrasive cleaners are the best way to clean a porcelain sink. Common household go-to's like bleach and hydrogen peroxide can be used to clean white porcelain, but the solution would need to sit covered in a layer of paper towels for 30 minutes to an hour.
To revive dull, faded tiles and give them a gorgeous shine, an ammonia-water mix is one of the best. This inexpensive and easy-to-use solution is powered by the natural cleaning properties of ammonia and will leave your tiles looking their best.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
Weekly cleaning with hot water and dishwashing soap is great, but for deep cleaning, we recommend baking soda and ammonia.
Porcelain Cleaner is a thickened, clinging, 9% Hydrochloric Acid formula for cleaning toilet bowls, urinals, and other porcelain surfaces in washrooms. This low acid formula easily flows and coats vertical surfaces for effective cleaning and deodorizing.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
For most types of tile, including porcelain and ceramic, you only need one key ingredient: A DIY mixture of warm water and dish soap will do the trick. Follow these steps to clean tiles: Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
While hydrogen peroxide is not normally used for cleaning surfaces, there is nothing in normal glazed porcelain that it would damage.
CLR's unique formulation has multiple uses! Safe for various applications and surfaces… (tubs, showerheads toilets, sinks, porcelain, glass, cement, stucco, brick, stainless steel, and much more)!
The bathroom sink, especially a porcelain one, can tend to get quite nasty over time. You see a lot of discoloration around the drain and the overflow hole. Just apply the concentrate solution to both areas, let it sit for a few minutes, then scrub it with a cleaning toothbrush.
Bar Keepers Friend even removes food buildup and knife marks from porcelain, ceramic, glass dishes, and serving ware. From floor to ceiling, Bar Keepers Friend leaves your kitchen shining. You'll quickly learn why we're the best kitchen cleaner!
Is Comet safe to use on Corian, Formica, porcelain, fiberglass and stainless steel. Yes. Comet Cleansers, Comet Soft Cleanser and Comet Bathroom Sprays are all safe to use on these surfaces.
Porcelain is made from baked clay
To make regular porcelain, the whole mixture is baked at 1300-1400 degrees. Porcelain enamel is made when the porcelain is melted together with a stronger metal. This makes porcelain enamel cookware both light and strong, with low porosity, so it is naturally non-stick.
If the stain is still visible, use a clean cloth moistened with acetone nail polish remover (or plain acetone), and rub the area and remove the stain. Step 4. In the unlikely event that the stain is still on the surface, moisten a soft cloth with Isopropyl Alcohol and use it to gently scrub the area.
Acetone revitalizes stained porcelain and fine china, giving new life to heirloom surfaces. When it comes to raw textiles, acetone is commonly diluted to remove gums, oils, and other undesirable substances from the fibers.
Baking Soda and Vinegar Combination
With a ratio of one portion of baking soda to two portions of vinegar, mix these two in the zip-lock bag and tie it up well with a rubber band. Ensure it is airtight and let it soak overnight. In the morning, you will wake up to a very effective stain remover.