Can I clean a bathtub with Pine-Sol?

Author: Justen Kuvalis I  |  Last update: Tuesday, July 8, 2025

Clean a bathtub and do a deep disinfecting clean to your tub. Step 1 Stop the tub drain and fill your bathtub with about two gallons of warm water. Step 2 Add ¼ cup of Pine-Sol® to the water. Step 3 Dip a sponge or scrubber into the bathtub and wipe down the tub and faucets.

Can Pine-Sol be used to clean bathtubs?

It's designed to tackle a wide range of messes on hard, nonporous surfaces with ease, from floors and sinks to countertops, stoves, bathtubs, and tile.

What is the best thing to disinfect a bathtub with?

Buy a gallon of plain bleach - Clorox or the house brand will do - doesn't matter - the cheaper the better. Put the stopper in the tub. Pour in about 1/2 of the bleach. Fill the tub with hot water. Let sit for 10-15 minutes. Drain water. Rinse tub.

What should you not use Pine-Sol on?

Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood. Q: Where should I NOT use Pine-Sol® Cleaners? A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces.

What is the best homemade bathtub cleaner?

Heat vinegar in microwave until hot and pour into squirt bottle. Add the Dawn soap. Put the lid on and gently shake to incorporate. You now have a powerful cleaning product that will melt soap scum and tub and shower buildup, clean sinks, appliances and just about anything.

I TRIED WD 40 on my BATHTUB Here's WHAT HAPPENED!

How can I deep clean my bathtub without scrubbing?

Fill the bathtub with hot water, ensuring that the stained areas are submerged. Add a generous amount of dish soap or liquid detergent to the water. Allow the bathtub to soak for at least 30 minutes or longer for stubborn stains. Drain the water and use a microfiber cloth or sponge to wipe away loosened grime.

What happens if you mix vinegar and Dawn dish soap?

Dish soap, known for its grease-fighting properties, pairs excellently with vinegar, which acts as a natural disinfectant and deodorizer. This blend not only targets stubborn stains and buildup but also leaves surfaces sanitized and fresh.

Does Pine-Sol need to be rinsed off?

Once the surface is wet with the Pine-Sol, let stand for 10 minutes, and then rinse or wipe off with water. If your surface is heavily soiled or dirty, remove excess dirt first before applying the product. When I say my surfaces are CLEAN clean, I mean it.

Why was Pine-Sol taken off the market?

In 2022, certain Pine-Sol cleaners were recalled due to a potential health risk involving harmful bacteria.

Will Pine-Sol get rid of mold?

Pine-Sol can be effective against some mold, in some circumstances, but it is not universally effective against all mold. Why is Pine-Sol effective against some mold? Because it has an extremely acidic and extremely basic pH. pH is mainly what determines whether a cleaning chemical is considered “strong” or not.

How do I get my bathtub white again?

How do I get my bathtub white again? By cleaning your bath with a mixture of white vinegar, water and baking soda, you should be able to rid your bath of most common stains and maintain its white finish.

Can I use Lysol on my bathtub?

In our range, one of the best products to clean your tub is Lysol® Power Bathroom Cleaner. For best results, follow these simple steps: Use some warm water to wet down the tub and tiles before beginning the cleaning process. Next, generously spray the cleaner on the bathtub for 15-20 seconds.

How do I get rid of bacteria in my bathtub?

If you want a germ-killing cleaning solution with the convenience of a ready-to-use spray, try Clorox® Clean-Up® Cleaner + Bleach. Just remove excess dirt, and spray Clean-Up® Cleaner 4–6 inches from the surface until thoroughly wet. Let stand for 30 seconds, then rinse or wipe clean.

What not to use to clean a tub?

Clean the tub thoroughly and rinse everything. Then dry the bath properly with a soft cloth to prevent limescale formation. Do not use aggressive products such as acid, chlorine, ammonia, bleach and abrasives. The latter create fine scratches, which we obviously want to avoid!

How to clean a bathroom with Pine-Sol?

Use Pine-Sol® on shower tiles, walls, fixtures, and even plastic shower curtains. Use your bathtub as your Pine-Sol® mop bucket when you hit the floors. Then, wipe away that pesky dirty water ring from the inside of the tub, as well as buildup on your faucet and drain.

What is the best way to clean a very dirty bathtub?

Sprinkle baking soda on all tub surfaces. For extra-dirty tubs, use tub-and-tile cleaner instead. Fill your bucket with a half-gallon of hot water and two tablespoons of dish soap. Dip a scrub sponge or a stiff nylon brush into the bucket, and scrub all bathtub surfaces.

Is Pine-Sol antibacterial?

When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces. It disinfects against Salmonella enterica, Staphylococcus aureus and Influenza A virus (Hong Kong strain).

What are the side effects of Pine-Sol?

May cause irritation of respiratory tract. Causes serious eye irritation. May cause irritation. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Is fabuloso all-purpose cleaner?

What is Fabuloso® Antibacterial Multi-Purpose Cleaner? Fabuloso® Antibacterial is an all in one cleaner that can be used for floors, walls, bathrooms, living rooms, and almost every hard surface.

Can I dump Pine-Sol in the toilet?

Step 4 Splash Pine-Sol® into the toilet bowl and hit every crevice with your trusty toilet brush. Let it sit for a few minutes and flush. TIP: Only have a few minutes to clean? Add a little of your favorite scented Pine-Sol® to the toilet bowl in the morning to keep your bathroom smelling fresh throughout the day.

What precautions should be taken when using Pine-Sol?

CAUTION: Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.

Does Pine-Sol get rid of dust mites?

The Pine-Sol® of today is a multi-surface cleaner that deodorizes, cuts through grease, removes grime, tackles dirt and removes 99% of allergens (non-living dust mite matter and pet dander). The Original Pine scent also disinfects high-touch surfaces in your household.

Why squirt Dawn in your tub at night?

Applying dish soap before the night gives the solution ample time to work its magic. As the hours pass, the dish soap loosens and lifts away the grime that has taken residence on your bathtub's surface.

What is the best homemade shower cleaner?

ingredients
  • 12 cup hydrogen peroxide.
  • 12 cup rubbing alcohol.
  • 6 drops of dawn liquid dish soap.
  • 2 teaspoons liquid jet dry.
  • 24 ounces water.

What should vinegar not be mixed with?

There are certain substances you should never mix with vinegar, including bleach and ammonia, because these combinations will produce chlorine gas and toxic vapors, says Ryan Sinclair, an environmental microbiologist and associate professor at the Loma Linda University School of Public Health.

Previous article
What is the life expectancy of glass?
Next article
Is it okay to have a window without a screen?