Alkaline cleaners are great for lifting oil stains, grease stains, and other petroleum-based stains from concrete. It's an added benefit that you can use it with a pressure washer, making the job that much easier. For an eco-friendly cleaner, we recommend Oil Eater cleaner degreaser (US$15.74, Amazon).
Cleaning concrete with muriatic acid can be a highly effective solution if used correctly, providing ultra-bright white concrete and removal of many types of stains. In one application, you can remove rust stains, oil stains, algae, and paint splatter with a quick chemical application followed by pressure washing.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Mix equal parts water and vinegar and apply it to concrete. If this stain removal technique doesn't work, use 100% vinegar and scrub stains out. This solution can work on many surfaces, including car seats and hardwood floors.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Vinegar or baking soda: These natural cleaners work well to clean cement patios with stubborn charcoal or rust spots. Mix equal parts vinegar and water, scrub the patio with the mixture, then give it a good rinse. If stains don't dissolve, try undiluted vinegar.
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean a concrete patio with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safe for lawns and pets.
Driveways and Sidewalks
If you don't have access to a pressure washer, you can use Super Clean, a hose and a garage broom to get similar results. Spray the area down with cold water, spray on some Super Clean and let it sit a few minutes. Work it into the concrete with the garage broom, and rinse with the hose.
The most common acids used to clean concrete and bricks are hydrochloric acid (muriatic) or phosphoric acid. For many years it has been the standard cleaning method to prepare concrete for coatings installations, to remove stains of any type from concrete and to remove concrete slurry or efflorescence from bricks.
Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals. Powdered peroxide-based formulas are generally high-performance alkaline, tile and grout cleaners and degreasers that are made for use on heavy-duty concrete.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
To clean and etch concrete, mix one part muriatic acid to 10 parts water. Brush or spray the acid solution on the concrete, wait eight to 10 minutes, then neutralize the acid by spraying the surface with a mixture of one cup of ammonia in one gallon of water.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
Because of this, it can cause harm to certain varieties of concrete surfaces. For example, vinegar can etch or discolor concrete surfaces that contain a high concentration of lime. You must do a preliminary test on a tiny, unnoticeable area before utilizing vinegar to clean the concrete surfaces in your home.
Combine 1/4 cup of liquid bleach with 1 gallon of hot water in a large bucket. To avoid damaging your lawn or walkways, always dilute your bleach and control your runoff when rinsing. Soak your brush in the solution and scrub the entire area until it's fully saturated.