Clean the mold first with a solution of ½ bleach and ½ water (it's safe in that formula). Scrub with a safe sponge like the one from Granite Gold, and let it sit for 15 minutes then rinse with water. Dry the walls and floor with a soft towel.
To kill off mold and mildew and keep your investment looking its best, travertine can be cleaned with a peroxide-based product like Oxiclean, which will not harm the polish on your travertine. Remember, hydrogen peroxide can bleach fabric, so, like bleach, watch your clothes and linens.
Acids like vinegar, lemon, or other harsh chemicals like bleach can react badly with the stone and cause discoloration and permanent damage. Grove Co.
Then, put on some gloves to protect your hands from direct contact with the growth. Step 2: Fill a bucket with a few litres of hot water and half a cup of ammonia. Dip a nonmetallic scrubbing brush into the solution and use it to scrub at the pavers; it will kill the mold spores and remove any stains.
You can use hydrogen peroxide to remove stubborn stains from your travertine tiles. Still, extra care must be taken when cleaning darker tiles as peroxide can bleach colors, so always do a test in an inconspicuous area before cleaning.
Removing Stains from Travertine Tiles
Try mixing baking soda with water to form a paste and rub it into the tiles. Allow the thick paste to sit on the tile for 15 minutes before cleaning it off. Never use harsh cleaners or take drastic measures in an attempt to remove stains from travertine tile.
Consider purchasing a floor cleaner formulated for travertine to use regularly. The label should clearly state if the cleanser is formulated specifically for travertine. Opt for a cleanser with a neutral pH of 7 or below. You can also use mild dish soap to clean travertine floors 3-4 times per year.
Chemicals like bleach and ammonia should be kept far away from travertine floors. Your best option is to use a pH-neutral cleaner, which means the product isn't acidic or alkaline based and, consequently, isn't as harsh or abrasive. It's also safer for everyone to handle, claims Tile Doctor.
STONETECH® Mold & Mildew Stain Remover is a ready-to-use, powerful specialty cleaner specifically formulated to remove mold, mildew and even algae on natural stone, tile, masonry and grout. It quickly dissolves unsightly mold and mildew stains without degrading or harming the surface.
The most common culprit is leakages. The perfect environment for mold to grow can be created by even a small leak from cracked tiles or loose grout. Other causes of black mold in showers include: Poor ventilation: If your bathroom is not well-ventilated, the moist air can cause mold to grow.
To remove mould, he advises using one part bleach to four parts water to spot clean mould on surfaces or, if you prefer to use diluted vinegar over bleach, add a concentrate of nine parts vinegar to one part water. Equipment: Diluted vinegar or bleach.
Oil stains can be caused by cooking oils, grease from cooking, tar, basically anything with an oil base (even lotions). These spots are noticed because the Travertine will look darker in specific areas where the oil-based product was dwelling for an extended period.
Certain products cannot be used on certain stones as they are too harsh or acidic and can cause etching on stones such as marble, travertine, and limestone. Products that should never be used on these types of stones include vinegar, Scrubbing Bubbles, Tilex, Comet, etc.
Black mould looks similar to other types of less-toxic mould. To be clear, you don't want any type of mould growing in your shower. No mould is good for your health. However, black mould will be tougher to remove and prevent from returning.
Avoid citrus or vinegar cleaning agents
Both these elements will cause the Travertine surface to dull. Acidic substances like lemon, orange peels, baking soda, vinegar slowly may penetrate the surface to cause irreparable damage.
Don't use acidic cleaners, like vinegar, on travertine floors. The acid may eat away at the surface. Don't vacuum travertine floors, as you could scratch or chip them. Don't try to remove stains, polish, or deep clean your travertine floor.
Simple Green Stone Cleaner is perfect for regular use on marble, granite, quartz, travertine, porcelain, limestone, ceramic, porcelain, Corian®, Silestone®, and other engineered stone.
Travertine will absorb harsh chemicals, which again will damage the stone. Do not use products like MR Clean, dish soap, Windex, or anything like these products. These products leave a residue on top of the travertine tiles, collecting and attracting dust and dirt.
We also NEVER recommend using OxiClean or Mr. Clean Magic Eraser as a cleaner on any type of natural stone. OxiClean and Mr. Clean Magic Eraser have many beneficial uses but using it to clean your travertine is NOT one of them.
You should seal travertine during the installation process. You'll need to reapply the sealer periodically. How often you need to reapply the sealer depends on the type of sealer as well as how much usage and traffic the travertine gets. Resealing every one to three years is typical.
We've said it before (and we'll say it again) DO NOT use Murphy's Oil Soap on any natural stone surface. Following our 20 years experience and the Marble Institute of America's Maintenance Guidelines, we recommend a neutral PH rinseless stone soap, used with an unbleached clean nylon pad to clean stone.
Travertine tiles require regular cleaning using a pH neutral cleaner. That means no bleach, acid-based, or abrasive products that could cause damage to the tile's surface. Travertine has pits, depressions, and craters that when left alone can collect dirt, dust, and grime.