A key-in-knob lock is a lock housed within a door knob that is unlocked with a key. The lock and barrel mechanism are mounted inside the door knob with the keyhole facing to the exterior.
The Cylinder: Also called the body, this is the part where the key is inserted. When it is locked, a series of spring-loaded pins are engaged by the cylinder.
1. Knob Locks. Knob locks are the most common type of door lock available and the chief security method for most doors. The lock cylinder is located in the knob itself instead of the door.
They don't include a key, merely a lock on the knob itself. These locks are not secure enough to keep potential home invaders out though, so they should not be used for exterior doors.
Deadbolt lock sets usually come with two keys when you purchase them. Some deadbolts do not include keys because of the manufacturer or lock type. To unlock deadbolt locks, you will need to use a knob or a key.
July 27, 2018. The passage/hall/closet function is ideal for doors in hallways, closets, and other rooms where a key is not necessary. The lock is freely operational from both sides of the door at all times.
Keyed entry door knobs have a lock and key mechanism on both sides for safety and security. They're used on front doors, patio doors, garage doors that go into your home or other exterior doors. Some have a button on the inside that you press to lock the door. The button unlocks when you turn the interior knob.
A typical key is a small piece of metal consisting of two parts: the bit or blade, which slides into the keyway of the lock and distinguishes between different keys, and the bow, which is left protruding so that torque can be applied by the user.
The parts of a door handle include knobs/levers, latch mechanisms, strike plates, boxes and cylinder locks.
When the right key slides into a pin-and-tumbler lock, the pointed teeth and notches on the blade of the key allow the spring-loaded pins to move up and down until they line up with a track called the shear line. When the pins align with the shear line, the cylinder can turn and the lock will open.
In short, a master key system allows one keys to open multiple different locks. At the same time, more than one key can open the same lock. In an office building, for example, each employee can have their own key which unlocks the door to their office.
A sash lock works by using a lock, latch & handle mechanism meaning you can open and close the door without the worry about it locking behind you and you don't need the key each time. Available in a variety of security levels dependant on requirements, along with insurance approved mortice sash locks.
Office Lock function is defined as a lock where the latch bolt operated by lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by knob/lever inside.
Classroom security locks allow control of the outside lever via key cylinders on both the inside and outside of the door. This allows a teacher to lock the classroom door during a lockdown event without opening the door and possibly being exposed to an intruder in the corridor.
While there is seemingly scope for every door lock in the world to require a unique key, reality is that a limited number of different key and door lock combinations exist. This is simply because key and door lock manufacturers don't need to go through the hassle of making each door lock unique.
Ultimately, whether you choose to have your deadbolt and door lock open with the same key is your choice. There isn't necessarily a one size fits all answer. If you want to have separate keys for a door that currently uses only one key, it is easy enough for a locksmith to set it up for you.
Keys are typically made of brass or a nickel-brass mixture, and the pins in a lock are also made of brass. Over years of use, keys and pins do wear down.
Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.
Connect with the best local Locksmiths
In cases like these, all the locksmith has to do is find the code and cut the key based on this code. To do this, a locksmith will need a code cutter. They simply have to insert an uncut key into the cutter, ensure the correct blades are in place and cut a new key.