A full bathroom contains all four fixtures;a shower, a bathtub, a sink, and a toilet. A ¾ bathroom is missing one of the fixtures, either a shower or bathtub. While both bathrooms are similar, a ¾ bathroom is more suited for smaller homes as a shower is more efficient than a bathtub.
Full Bath. To be considered a full bathroom, a toilet, sink, bathtub, and shower (or a tub and shower combo) must be present. You may also find additional features like a linen closet, a bidet, or dual sinks, but they are not required. A full bathroom will typically be located near or adjacent to the primary bedroom.
In general, you'll have three types to choose from—master, guest and half—but the choices for how you configure and design these are just about infinite.
A full bath requires a minimum of 36 to 40 sq. ft. The finished room must measure at least 5 ft. in one direction to accommodate a tub.
Side layouts are designed with the sink, toilet, tub or shower all installed along one wall of the bathroom. Full bathrooms with a center layout feature components on two walls—the toilet and sink paired together on one wall, and the tub or shower in place along another.
Full Bathroom vs Half Bathroom
A full bathroom is a bathroom that includes a shower, a bathtub, a sink, and a toilet. A half bathroom only contains a sink and a toilet. If you have a large family or a larger house, a full bath is ideal as it has both a shower and a bathtub and can accommodate multiple users.
A full bathroom is made up of four parts: a sink, a shower, a bathtub, and a toilet. Anything less than that, and you can't officially consider it a full bath. Therefore, a bathroom with a sink, toilet, and shower is considered a three-quarter bath. A bathroom with just a sink and a toilet is a half-bath.
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.)
Real Estate Agent Explains Full Bathroom
On a property listing, a full bath is often labeled as a 3-piece, 4-piece, 5-piece or even a 6-piece bathroom. Different combinations of plumbing fixtures can make up a full bathroom, but there always must be a toilet, a sink and somewhere to bathe (a shower or a tub).
These types of bathrooms do exist, and they are referred to as quarter-bathrooms. These quarter-bathrooms are quite rare simply due to the fact that they contain only one of the 4 main elements of a bathroom. The most commonly seen are those that contain a shower and are typically found at beaches or pools.
The average ratio for most homeowners is that there should be at least two bathrooms for every three bedrooms. For instance, if you have a three-bedroom house, it is most likely that there will be the main bathroom for adults, and a family bathroom for children and other members of the family.
A half-bath, also known as a powder room or guest bath, has only two of the four main bathroom components—typically a toilet and sink.
One-quarter bathrooms
What is a quarter bath? These are most commonly found in older, smaller homes, usually in the basement, especially an unfinished, and consist of just a toilet or shower stall. Sometimes, they aren't even partitioned off into their own separate room.
The short and simple answer to whether a walk-in shower is considered a full bath is “no”. It is not. As mentioned previously, a bathroom is considered a full bath only when it has all the 4 components of a sink, toilet, shower and bathtub. If it doesn't include all 4 features, then it doesn't count.
When it comes to choosing between a walk-in shower or bathtub, there is no right or wrong answer. It all depends on your needs, preferences, and budget. If you have a small bathroom, a shower might be the best option. If you want a luxurious bathing experience, a walk-in tub might be the way to go.
If you are thinking about removing the tub, you're not alone! If you're concerned about resale, most Home Buyers DO want a tub, but it doesn't necessarily need to be in the Master Bathroom. So long as there is a tub somewhere in the home for kids (and, yes, pets!), it isn't a deal breaker.
What is a four-piece, otherwise known as a full bathroom? A four-piece bathroom suite contains a sink, a bathtub, a shower and a toilet. Usually, the tub and the shower are placed close to each other on the other side of the room as the door, with the vanity in the middle.
A three piece bathroom suite is one that contains a basin, a toilet and one other fixture.
3 pc. > Sink, toilet, and shower stall. 4 pc. > Sink, toilet, and tub with shower.
A toilet should have some elbow room between it and another fixture or vanity. The NKBA's recommendation is at least 18″. Codes allow a minimum distance of 15″. If you're placing your toilet in a compartment, it should be 36″ x 66″, although codes will allow 30″ x 60″.
The distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. Code Requirement: A minimum distance of 15 inches is required from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle.
A standard guest bathroom includes a sink and a commode, which request about 20 square feet (sqft) of space. A medium-sized bathroom will need about 30-40 sqft to accommodate a sink, commode, and shower area, while a full-sized bathroom with all these elements and a bathtub requires an area of 50 sqft.
A 3/4 bath typically consists of a toilet, sink, and shower. Most 3/4 bathrooms have a toilet, sink, and a standing shower, although a bathroom with a bathtub and no shower is also considered a 3/4 bath.
What is a Hollywood bathroom? A Hollywood bathroom may sound fancier than a Jack and Jill bathroom but it's just the name given to a design with a separate sink and mirror outside. Like a Jack and Jill bathroom, the space can be accessed from more than one entry point and from either side.