Offline locks with keypads have a default PIN of 13579 and “#”, which can be used for installation, testing and construction access. To test, enter the default PIN (13579 and “#”). The Schlage button will blink and the lock will unlock.
Because most of the default code of the keypad door lock are very simple when they are set at the factory, either 00000 or 1234, which can be easily deciphered by strangers, it is very important to change a use code that only you know and is not easy to be guessed by others.
The default programming code is printed on a label on the programming guide that came with your lock. If you do not have access to the guide, remove the lock from the door and look on the back of the lock for a label containing the default code.
Key codes are found on the side or the bow of the original key that came with your new lock. Some brands do not stamp this code on the side of their keys. If this is the case the only way to get that code is with a key gauge.
A code preventing the unauthorized use of a mobile phone. the user isn't given access to the phone without entering the right sequence of numbers using the keypad.
If you need to find your programming code, look inside the back of your lock. Simply remove the battery cover and you'll see a label with your Prog. Code.
USER CODES
They may be found on the stickers, one on the back of the keypad assembly and one on the front of this User Guide. Used to unlock the lock. These four numbers must be different from the first four numbers of the Programming Code. Up to 19 possible User Codes can be stored in the lock at one time.
Digital keypad locks work by first requiring a user to enter a PIN code into the numeric keypad. Since the lock is digital, it has a power supply. If a user enters a code that has been programmed in the lock, it will disengage the deadbolt and allow the user to open the door.
Yes, you can. You can change the locks on the security doors by either completely replacing the locks or rekeying them. Replacing means literally removing the whole lock infrastructure from the door (including the handle if necessary) and installing a brand new lock as a replacement.
Rekeying a lock is a common task for a locksmith, and this simple project only takes about 30 minutes to complete. The only tools you'll need to rekey your lock yourself are a rekey kit and the current key to the lock. This saves considerable money, especially when you need to access multiple locks with the same key.
Answer: There are five or six digits in a key bitting number because most pin tumbler locks have five or six active pin chambers.