Light-duty pressure washers are rated at 2,000 PSI or less and are suitable for cleaning automobiles, motorcycles, boats, bicycles and all-purpose cleaning. Medium-duty pressure washers produce 2,000 to 3,000 PSI and can be used to remove grease and grim from concrete, sidewalks, decks and siding.
Mid-Range Power: 2,000 to 3,200 PSI
The most versatile category of pressure washers, those ranging from 2,000 to 3,200 PSI effectively clean cars (including the most well-used off-road vehicles), home siding, fences, boats and grimy garage floors. Those closer to 3,200 PSI work effectively on tough stains, too.
To clean concrete, exterior siding or an asphalt driveway, you'll want at least 2,000 to 2,800 psi and 2 to 3 gpm (4,000 to 8,400 ECUs).
For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces.
2,000 - 2,900 PSI: This is a moderate strength unit used heavier residential tasks. These units are commonly sold as either electric or gas pressure washers. 3,000 - 6,900 PSI: These high pressure models are what professional pressure washers and contractors usually use.
1000-2000 PSI
Good for light cleaning jobs or for jobs where the surface to be cleaned is soft and easily damaged. This pressure range is good for cleaning decks and siding and for light-duty auto cleaning.
Medium-duty pressure washers produce 2,000 to 3,000 PSI and can be used to remove grease and grim from concrete, sidewalks, decks and siding.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
Choosing a Pressure Washer
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi).
If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
To correctly strip old paint, you should work with a power washer with a psi of 2000 or higher. Even starting out at 2000 probably won't do the trick and you'll need to set the psi closer to 3,000 for effective paint stripping.
PSI Pressure range for Different Surfaces
Different surfaces require different levels of PSI pressure. Generally, for most residential uses, an electric pressure washer (less than 2000 PSI) will suffice. Soft surfaces, such as decks and siding, usually require more cleaning power than harder surfaces such as driveways.
For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi. Choose the right tip to use as well.
From there, you can work your way up, though it is generally best not to exceed 2000 PSI. It is also essential to use the right nozzle tip for the job. Don't use a narrow nozzle that will focus water too much in one area, as this may crack the grout or bricks. A nozzle that fans the water out is best.
Your pressure washer should have a minimum pressure rating of 3000 psi to effectively clean your sidewalk. There are a few situations where a higher pressure rating might be needed, but exterior cleaning experts all agree and recommend that 3000 psi is appropriate for residential use.
Checking your home's water pressure is a simple way to avoid costly water damage. Water pressure is measured in psi, or pounds per square inch, and represents the force at which water enters your home from the water main. Normal psi for a home pipe system is between 30 and 80 psi.
Using a Pressure Washer to Clean Vinyl Siding
Pressure washers are easy to operate and are perfectly safe for cleaning your siding, contrary to what you may have heard before.
The main difference is that power washing uses highly pressurized steam to do the cleaning while pressure washing just uses unheated tap water, without the help of a heating element.
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster.
The quick answer is yes, power washing can degrade a concrete surface.
If you need to clean a two-story house, you'll need a heavy-duty or extra heavy-duty pressure washer. This will give you a water pressure of 2,800 PSI (Pounds Per Square Inch) or higher and three to four GPM (gallons per minute) of water.
You'll need a power washer that provides a force of 3,000 PSI or more. The higher the pressure, the better and faster is the cleaning. If you want to use a lower pressure on certain surfaces, you can always attach a larger spray tip to it.
Electric pressure washers are the better option for low environmental impact. They run at about 80 decibels (dB), which is around the same level as a standard vacuum cleaner. These tools use clean electricity for power, so they don't produce emissions or rely on fossil fuels for operations.