Most ovens do not have a dedicated reset button. However, if an oven is experiencing issues, you can often reset it by unplugging it from the power source or turning off the circuit breaker for a few minutes. After restoring power, the oven may return to normal operation.
Open the oven door and locate the pilot light opening at the bottom of the oven. The owner's manual should identify the pilot light's exact location if it's hard to find. Use a grill lighter or long match to light the pilot light valve at the bottom of the oven. Some ovens are designed to be manually lit at each use.
A malfunctioning thermostat can also lead to oven shutdowns. The thermostat regulates the oven's temperature, and if it's not working correctly, your oven may turn off prematurely. Here's how to address this issue: Calibrate the Thermostat: Consult your oven's manual to learn how to calibrate the thermostat properly.
The most common issue is that no power is getting to the burner or coil. This could be a tripped breaker, a blown a fuse, or a defective switch. If there is power going to the burner, but it still doesn't work, then there might be an issue with the burner or coil itself, and it will need to be replaced.
No oven has a Reset Button. If you want to reset the unit, you can turn the circuit breaker off for 5 minutes, and turn it back on. This can be enough to reset minor glitches most of the time. Otherwise, if you still encounter power outages or you lose power randomly, this may be a sign of a bad control board.
Cleaning off the igniter can help fix your problem. But if it's visibly damaged or refuses to ignite after cleaning, you'll likely need to replace it and you should book a repair with an appliance expert.
If the pilot light is extinguished, allow at least 5 minutes for accumulated gas to disperse after turning off the gas valve before attempting to relight the pilot. Follow manufacturer's specific instructions for relighting the pilot after the gas has dispersed.
If your oven is locked after a power outage, try performing a general reset by unplugging it for a few minutes. If this doesn't work, consult your oven's manual for specific instructions on unlocking it. If you're still having trouble, it may be time to call a professional.
The most common reasons your oven display is not working are a defective electronic control board, defective control panel or a dead power supply.
Inside the oven, look to the back to spot the fuse assembly. If the unit has this additional fuse or breaker system, components such as the oven light, the range heating elements, the timer, and a self-cleaning feature may be separately fused.
The possible reasons your oven is not working may include a broken baking or broiling element, a malfunctioning spark element (spark electrode), a broken igniter, a blown fuse, an issue with the control board, or outlets not providing enough power to the oven.
Push in and hold the oven knob and turn it to the “ignite” setting. Push in the oven knob with one hand so you can turn it and keep holding it until you have lit the pilot light. Turn it to the left to the “ignite” symbol or the first temperature setting.
Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the appliance. This should reset the electronic controls on the Range or Wall Oven.
Make sure the multimeter is calibrated and then turn the dial to the lowest ohm rating. Place the multimeter on the thermostat. If the thermostat has a reading of zero or as close to zero as possible, it is working fine. However, if it has no reading at all, your oven thermostat is faulty and will need replacing.
The most common reason for this issue is that the broil element and the baking element remain functional. However, there may be a blown internal fuse. If it is not the fuse, it could be the temperature sensor, broken or frayed wiring, or even a breakdown of the oven control board.