White vinegar and baking soda in equal parts is a cost-efficient and effective means of getting rid odors in a toilet. Add them to the tank, mix them in and then use the toilet brush to gently scrub the tank. Let it sit for a few hours, scrub the tank again and flush.
Drain the water out of the tank. Add 2 tablespoons of Dawn, a cup of vinegar and ½ cup of baking soda. Use the toilet brush to swish it around. Scrub down the sides and bottom.
To that end, when it comes to using baking soda for your toilet, there are two primary purposes: using baking soda to clean and remove stains, and using baking soda to unclog your toilet.
Cleaning your toilet tank is pretty quick and easy with vinegar and baking soda. You only need to do it once or twice a year, and it can help get rid of bacteria, mold, and mineral deposits to keep you and your family healthy.
Also, make a simple routine part of your weekly cleaning: Sprinkle the toilet with cup of baking soda. Let it sit for 30 minutes, then spray or squirt with vinegar (a mild acid) to moisten. Scrub with a bowl brush and flush away [source: Niagara County].
Allow the baking soda and vinegar combination to sit for at least 20 minutes. You might hear your toilet flush when the clog gets removed before the end of that time. If that happens, run the handle to refill the bowl and flush it for a second cycle.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
Start by pouring 1 cup (240 mL) of baking soda into the clogged toilet, then add 1 gallon (3.8 L) of boiling water. The heat and pressure of the water can help unclog the toilet faster. If you hear a suction sound and see the water draining out, then gravity and the hot water were enough to unclog the toilet.
Let it sit. You may start to notice improvement in as little as 15 minutes, though that is the minimum time your dish soap should sit in the toilet. Again, we prefer to let it sit overnight whenever possible. Once enough time has passed, go ahead and flush your toilet.
For example, applying white vinegar or lemon juice and scrubbing with a toilet brush typically works on newer stains. You can also try mixing white vinegar and baking soda if you need a stronger scrub. For older stains, using an industrial-strength cleaner like CLR should do the trick.
The best way to clean toilet stains from tough mineral buildup is with lemon juice or any source of citric acid. Spray on the lemon juice and leave it overnight. Then spay on another light layer and wait a few minutes before scrubbing your toilet. Flush to rinse away the stain.
Baking soda can usually be used on many metal surfaces but take caution with aluminum. You may be able to get away with using it if you quickly apply it and rinse it off. Leaving it on can cause it to oxidize which would change the aluminum's surface color.
A much better solution is to use some WD-40 Multi-Use Product. Most people don't know that WD-40 can solve many of their household cleaning needs quickly and easily. When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it.
Fill the tank with at least 3 gallons of distilled white vinegar and allow it work for at least two hours. After the soaking period, empty the tank by flushing away the vinegar. Follow the same steps as with the disinfectant cleaner. Use a long-handled brush to scrub the loosened grime.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
Cleaning your toilet regularly with vinegar will prevent hard water stain buildups. Add a little vinegar to the bowl and scrub away stains with your toilet brush once weekly. Since you'll likely have hard water buildups in your toilet tank, a monthly vinegar application up top can keep the whole system clean.
Chances are these issues are caused from a mineral in your water called manganese. Seeing manganese stains from your water isn't an emergency, but at high levels, it can have an effect on the quality of your drinking water, laundry, appliances and plumbing.