It is effective at killing mould, germs, and bacteria, so any stains you have on your wall will be removed by it too. There are a few ways to create the vinegar solution to clean painted walls. All you need to do is create a 50:50 solution of water and white vinegar in a spray bottle.
You can also use most non-abrasive multipurpose cleaners on this type of paint or make your own by mixing one teaspoon of liquid dish soap and ¼ teaspoon of white vinegar into one quart of water. This cleaner should work on most latex paints. Finally, oil-based paints can take a slightly stronger cleanser.
(Or you can go “old school” and do the cleaning with vinegar: Use two or three tablespoons of distilled white vinegar to a gallon of water. Using vinegar to clean a painted room can be surprisingly effective.) Wet a sponge in the mixture and wring it out to dry.
Warm water, mild dish detergent, a soft cloth, and an even softer touch can clean your walls without removing paint. Dusting beforehand is essential. Spot-test any new cleaner if you're unsure how the paint will respond.
A mild dish soap and water solution or vinegar and water solution is safe for cleaning walls without damaging the wall's paint.
Rinse the walls with a clean, damp rag to remove any residue once you're done cleaning, and let them air dry.
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
If you come across any stubborn stains on painted walls, turn to baking soda and water. Baking soda is a natural stain fighter—mix a half cup of baking soda with a quarter cup of water until it forms a paste.
Use warm water and an all-purpose cleaner for walls with latex paint. Wash this type of paint with a soft sponge and a safe, all-purpose cleaning solution like water, dish soap, and distilled white vinegar.
When cleaning walls with latex paint, you want to add dish detergent and distilled white vinegar to your solution. You can use a little of both or just use two tablespoons of vinegar—or three tablespoons if you know you're going to need to use some elbow grease.
Vinegar is not a strong enough or corrosive enough substance to damage paint and you can minimise the risk by using a cloth or sponge wet with vinegar on the glass and not spraying the whole car or leaving it in the surface for an extended period.
If you use a light hand with the vinegar, the aroma will go away on its own in 30 to 60 minutes, particularly on solid surfaces. If it's on a soft surface, it may take a day or so. Air circulation can make the vinegar aroma dissipate more quickly. The vinegar aroma will go away when it's dry.
Start spot cleaning with water and vinegar
This is most likely to work if you tackle wall-stains as soon as you see them,' advises Vera Peterson, president of Molly Maid a Neighborly company. 'If plain water doesn't work, try cleaning with vinegar. Add a little to your damp sponge or cloth and gently scrub the walls.
Professional painters use mild detergent and warm water when washing walls prior to painting for the best results.
'While Magic Erasers work great on gloss and semi-gloss paints, be careful when scrubbing water-based paints such as latex or acrylic,' Sarah says. 'It will take off some of the paint on the walls. Just scrub gently.
Add about ¼ cup of your favorite Pine-Sol® scent to a gallon of water. Dip a sponge, rag or cloth in the mixture and wring out until it's lightly damp. Then, start wiping down the walls from top to bottom, using Pine-Sol® at its full strength on stubborn marks. Wipe down the walls with water.
Pour equal parts of vinegar and Dawn into a spray bottle. Gently shake, then spray liberally onto the surface to be cleaned.
Now, don't confuse distilled with basic white vinegar, which is stronger and has up to 25% acetic acid. That vinegar is sold exclusively for cleaning purposes and is not a good idea to ingest. However, beyond cooking, distilled white vinegar can be used for many of the same household chores.
There's no set time that the vinegar smell will linger. It depends on the air flow in the space. However, vinegar actively looks for things to bind to. In most cases, it won't take more than 5-15 minutes for the smell to go away.
“Set time,” or the time a disinfectant must rest on a surface in order to work effectively, is also important. The set time for vinegar can be up to 30 minutes.
1. Cleaning Bathtub and Shower Walls. Use your white vinegar cleaning solution to break down soap scum, mold, and dirt in your bathtub. Spray it liberally around your bathtub and shower walls, let it sit for several minutes, and wipe it down with a sponge or soft cloth.
Vinegar can kill black mold and is best used on nonporous surfaces. White vinegar is a powerhouse for cleaning, deodorizing, and disinfecting around the house. It can also kill black mold, a mold that commonly appears when there is water damage. Spray vinegar onto the moldy surface and leave it for an hour.