On a Honeywell thermostat, Set, Hold, and Run refer to the three core ways you manage your temperature and scheduling.
For the best energy efficiency and convenience, you should keep your thermostat on Run. This allows the device to follow your pre-programmed energy-saving schedule. Only use Hold for temporary overrides when your daily routine changes, such as during a sick day, a holiday, or an extended vacation.
Whether "hold" or a "schedule" is better depends on your routine and the type of HVAC system you have. Setting a schedule is generally more energy-efficient, while the hold function is best for temporary comfort overrides.
How long a hold lasts depends entirely on the type of hold selected:
You generally should not leave your thermostat on a permanent "Hold" setting. While it guarantees a steady temperature, it disables the efficiency logic of your programmed schedule, often causing your HVAC to run constantly and leading to higher energy bills.
For optimal energy savings and comfort, the U.S. Department of Energy recommends setting your thermostat to 𝟔𝟖∘𝐅 (𝟐𝟎∘𝐂) while you are awake and at home.
Hold vs set on thermostat: The "hold" function allows you to temporarily maintain a specific temperature, overriding the programmed schedule, while the "set" function is used to establish the regular daily temperature schedule that the thermostat will follow unless "hold" is activated.
To save money in winter, the Department of Energy recommends setting your thermostat to 𝟔𝟖∘𝐅 while you are awake and at home. When you are asleep or away from the house, lower the temperature by 𝟕∘𝐅 to 𝟏𝟎∘𝐅 for eight hours a day to potentially cut your heating bill by up to 10%.
The first signs of a bad thermostat depend on whether you are referring to your home HVAC system or your car’s engine.
Using the hold feature saves energy only if you set the temperature to a more efficient level than your normal schedule, such as setting a permanent hold at a low temperature while on vacation. However, constantly using hold to bypass an energy-efficient schedule can lead to higher energy bills.
For most healthy adults, 68°F (20°C) is not considered too cold and is actually the standard indoor temperature recommended by the U.S. Department of Energy. It serves as a great sweet spot for balancing physical comfort with energy savings.
On a Honeywell thermostat, "Run" means the device is following its pre-programmed schedule. When you press this button, it cancels any temporary or permanent temperature holds and returns your home’s heating and cooling to the automatic time and temperature settings you previously programmed.
Using your Honeywell thermostat’s Hold and Run functions allows you to easily override your pre-programmed heating or cooling schedule.
For HVAC thermostats, a programmed schedule is vastly superior for energy efficiency and lower utility bills, saving the average household up to 10% annually. The "Hold" feature is best used only for temporary overrides, like when you have a day off or are hosting guests.
Getting your Honeywell thermostat back to normal usually requires a simple reboot or factory reset depending on your specific model.
A thermostat typically lasts 7 to 15 years, depending on its type and technology. While older, basic models tend to last the longest, modern smart features make upgrading a smart thermostat beneficial as it reaches the end of its life cycle.
To determine if your Honeywell thermostat is bad, check if the display is blank or unresponsive with fresh batteries, listen for the system "clicking" when the temperature is changed, or bypass the thermostat's internal switches using a jumper wire.
Yes, you can absolutely replace an old thermostat with a new one as a DIY project. However, success depends heavily on your existing wiring. Most standard 24-volt systems (like forced-air gas furnaces and central AC) are highly compatible with modern thermostats, but complex systems require careful planning.
No, 72∘F is generally not considered cold indoors. In fact, 72∘F is widely regarded as the perfect "sweet spot" for human thermal comfort and is the industry baseline most people target when heating or cooling their homes.
Maintain your thermostat at a minimum of 55°F (13°C) to protect your pipes. While water freezes at 32∘F (0∘C), keeping the ambient air at 55∘F ensures the temperature within your walls and near exterior-facing pipes stays safely above freezing.
No, it is generally not cheaper to leave your heating on low all day. According to the U.S. Department of Energy, maintaining a constant temperature results in continuous heat loss, causing your system to consume more overall energy.
A permanent hold means you have overridden the schedule, and you have to manually resume the schedule. This can also be energy inefficient. A temporary hold may be a better option if you tend to forget things or want to ensure you are in a better position to save energy.
Keep your thermostat on Run most of the time to maximize energy efficiency. Use Hold only for temporary overrides, such as when you are on vacation, have house guests, or are staying home on a weekday.
During winter, the lower the interior temperature, the slower the heat loss. So the longer your house remains at the lower temperature, the more energy you save, because your house has lost less energy than it would have at the higher temperature.