While mold may not find enough nourishment in concrete alone, it can feed on moisture, algae, bacteria, salts, dust, pollen, dirt, dead skin, and other particles trapped within it. As mold degrades concrete, the material becomes more porous, allowing for further moisture, bacterial and particulate intrusion.
Vinegar Solution
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold.
In time this elevated surface moisture creates an environment conducive to mold growth. Mold growth on concrete due to humidity is typically diffuse and spread across a large area. Mold growth on a concrete wall due to excess humidity. On it's own, concrete does not provide a sufficient food source for fungal growth.
When temperatures fluctuate above or below this range, mold becomes dormant. Not only does mold need oxygen and adequate temperatures to survive, but it also needs a food source just like we do. While mold only feeds on organic materials, it can grow on any surface, especially concrete.
The acid that molds produce can degrade concrete, compromising its strength and integrity. While mold may not find enough nourishment in concrete alone, it can feed on moisture, algae, bacteria, salts, dust, pollen, dirt, dead skin, and other particles trapped within it.
Penetrating sealers are a great choice if you want an all-in-one concrete sealer. This does the job of concrete sealers and coating by closing up the pores of the concrete. This way, your project can be protected from weather, stains, and mold at the same time.
Mold generally looks slimy or fuzzy, tends to have a raised texture, and can come in a rainbow of colors, including deep green and black. Mildew is powdery, looks white or gray, always appears flat, and grows on surfaces.
Concrete Sealers Can Provide Mould and Mildew Prevention
If this dampness doesn't dry, it will take shape. Shape and mould can frame on concrete that is left wet for broadened timeframes. This can make green staining show up on your concrete surface.
Our top pick is the RMR-86 Instant Mold and Mildew Stain Remover for its versatility and effectiveness on nearly every surface. For those looking for an eco-friendly mold remover with natural ingredients, we recommend CLR Mold and Mildew Clear.
Anytime that there is a higher water to cement ratio, it will decrease the strength and durability of the concrete. Water can breakdown the materials that concrete is made of. Create mold and bacteria in the concrete, and cause concrete foundations to move and shift. All of these result in cracks in the concrete.
Efflorescence. Efflorescence is a white powdery substance that can be seen in both sealed and unsealed concrete surfaces. It's commonly caused by water vapor migrating through the floor, bringing minerals to the surface. This is an indication of moisture intrusion, which may compromise the structural material.
Use undiluted white vinegar on hard surfaces in kitchens and baths. A bleach solution also works to kill mold. Mix one cup of bleach in a gallon of water, apply to the surface and don't rinse. Mix a 50/50 solution of ammonia and water.
Mildew and mold are both fungi, but mildew is not as invasive or troublesome as other types of mold. Typically found in wet areas, mildew looks grayish-white and may turn brown. It's flat and powdery and it's an easier fungus to clean because it lives only on the surface of a material (such as bathroom tile).
However, it is quite risky living in a home with visible mold since you are exposed to mold spores that can become airborne when blown around by the gush of wind from your windows or HVAC systems. If mold is left unattended, it can spread to other areas of your home causing serious health problems.
Hydrogen Peroxide. Hydrogen peroxide is a handy and non-toxic solution for getting rid of mold in your home and basement. Mix with water and then spray on the affected floors and walls. Allow it to sit on the mold for ten minutes, and then use a scrub brush to scrub off the mold and mildew.
By using a penetrating concrete sealer like the Siloxa-Tek 8500 mold, mildew and organic growth will be reduced and made easier to clean. The Siloxa-Tek 8500 is our favorite product to treat nearly any application.
Pay attention to the color and consistency: We already talked about black mold above, though it's more accurate to say that Stachybotrys chartarum has a greenish-black hue. Toxic mold can also have a grayish, soot-like texture, or a slimy, wet surface. In some cases, you may even notice furry orange or brown spots.
It isn't just black or dark green mold you have to look out for. Some toxic mold is gray, and may even have an ash-like texture. Contrastingly, it may have a slimy or wet surface.
Without a doubt, mold is worse than mildew. According to American Home Shield, “the difference between mold and mildew is that unlike mildew, certain types of toxic molds can result in serious health problems for you and your family.” Black mold, in particular, is dangerous for humans.
Cleaning vinegar, which contains 6% acetic acid, is the best type for killing mold. White vinegar containing 5% acidity will also work just fine. If you don't already have some at home, white vinegar can be inexpensively purchased at most grocery stores.
Vinegar is natural and safe mild acid that can kill 82% of mold species. Plus it doesn't give off dangerous fumes like bleach. If you want to use vinegar to prevent mold growth on surfaces, spray vinegar on the surface and leave it. Repeat every few days to keep the surface mold-free.
White vinegar is a mildly acidic product that cleans, deodorizes, and disinfects. It can also kill 82% of mold species, including black mold, on porous and non-porous surfaces. You can use it safely on most surfaces, and its offensive odor goes away quickly. Pour undiluted white vinegar into a spray bottle.
Efflorescence is the white chalky powder that you might find on the surface of a concrete or brick wall. It can be a cosmetic issue, or it can be an indication of moisture intrusion that could lead to major structural and indoor air quality issues.
The easiest way to determine if it's efflorescence is to spray water on the substance. If it's mold (or a spider web), it won't change much. If it's efflorescence, it will dissolve.