Poor Water Circulation Your pool must have excellent water circulation for the shock treatment to work. That way, the shock can reach every area and kill all traces of algae.
If you notice cloudy water the next day after shocking, that's totally normal. Just keep running your clean filter. and add a clarifier or a flucculent to help speed things up. Then you wanna retest and balance your water. and enjoy your now hopefully crystal clear pool. For more help.
Green pool water is often a result of algae growth, and chlorine is effective in killing algae and restoring the pool's clarity. However, simply adding chlorine may not be sufficient; you may also need to adjust the pH level, shock the pool, and run the filtration system consistently to fully clear the water.
It could be you didn't add enough chlorine. It could be that didn't brush the pool well enough first. It could be that your filter isn't performing as well as it could or just needs more time.
Shocking your pool with chlorine can be an effective method to kill algae. The process can take up to three days and we recommend checking with a pool professional for the amount of shock you should use for your particular pool.
Use a pool brush to vigorously scrub any pool surfaces covered in algae, including the walls, floors and steps. Apply a green algaecide according to the directions on the label. Let the water circulate for 24 hours, then brush the pool surfaces again. Vacuum or backwash to remove any remaining dead algae.
Calcium Hypochlorite Pool Shock: Power Powder Plus 73
Leslie's Power Powder Plus 73 is the fastest dissolving granular shock on the market. This particular cal-hypo pool shock is 73% calcium hypochlorite, which means it can handle the toughest algae and bacteria problems.
It's Not an Algae Problem
Algae aren't the only possible culprit behind a green pool. High copper content can also be to blame. If the water has a high copper level, the shock treatment can oxidize the copper and turn the pool green.
Thankfully, by far the most common reason why pool shock wouldn't work is very straightforward. It's all to do with your pool's pH. Pool expert Rafi Friedman told me that 'Pool shock works best with a balanced pH. If your pool's pH is too high or too low, the shock won't be effective.
Is it possible to shock your pool too much? Yes—excessive shocking of your pool will keep it at an elevated chlorine level. This will cause irritation of the skin and eyes as well as excessive wear and tear on your pool filter system, including excessive corrosion of all metal parts.
Clear pool water with a green tint may be from pollen, chlorine-resistant algae, or most often from a too-high pH level. When a pool's pH is over 7.8, even high levels of chlorine destabilize and cannot sanitize, and metal in your water and pool components can oxidize, giving off a greenish hue.
What's the best way to get rid of green algae? Suncoast All In One Algaecide is the best way to get rid of algae in your pool. It kills and prevents every type of algae, including black, green and yellow mustard algae, as well as pink bacteria. In addition, it has clarifying properties to help keep your pool clear.
Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.
Before you start pouring shock in the pool, the first step is to brush the sides and floor of your pool to loosen all the algae. Doing this breaks the skin and allows the pool shock to more easily kill the algae. Once you've done this, it is important to make sure you have the proper pH level in your water.
You didn't use Flocculants or Clarifiers. If you still can't see the bottom after shocking your pool, you may need to add a clarifier or flocculant the next day to remove the dead algae. Flocculant binds to small particle impurities in the water, causing them to clump together and fall to the bottom of the pool.
Algae will remain in your pool after shock if you've had insufficient chlorine and an overabundance of metal elements in the pool water. Therefore, to start the cleaning process. Remove all the debris from the pool with a leaf net and then let the smaller dirt fragments settle.
Run your filter 24 hours a day and backwash 2 times a day for the quickest results. Run the backwash cycle for 60 - 90 seconds. The more you run your pool, and the more you backwash the filter, the faster the pool will clear up.
Green or Dark Green Pool Water:
This means there's a medium amount of algae in your water and you'll need to triple shock your pool. Triple shocking requires 3 pounds for every 10,000 gallons of pool water.
For an isolated algae bloom, use granular chlorine to treat it. You can also get a brush, apply algaecide to the water, and scrub. If you have free-floating algae, you'll have to shock your pool. To start, balance your pool water to get your pH between 7.1 and 7.3.
It's not too uncommon for your pool water to be slightly cloudy after shocking, especially if you use a granular chlorine shock. It typically takes about 24 hours for the granules to fully incorporate into the water and disappear. Most cloudy water issues after shocking should resolve within an hour or two.
Determine how severe the algae or other biological growth is. For heavy soiling, dilute 2 parts water to 1 part GK Greener Kleener. For light to medium soiling dilute 3 parts water to 1 part GK Greener Kleener. Easily apply the formula to the affected area using a garden sprayer or a brush.
Shocking the pool to 30 ppm of free chlorine, with proper pH, eradicates most algae. For best results, vacuum the pool before shocking, and brush the entire pool before and after shocking.
Shocking your pool is a crucial step in clearing green water. Here's how to do it: Test and adjust pH and ensure the pH is between 7.2 and 7.6. Calculate Shock Dosage: Follow the manufacturer's instructions for the correct amount of shock for your pool size.