To boost its storage capabilities, consider installing a shelf directly underneath the vanity to hold extra towels and baskets for smaller items. Or simply place large baskets on the floor below the vanity to quickly add storage.
The typical comfort height for the positioning of a floating bathroom vanity unit can be anything between 25-30 inches from the floor, or 635 to 760mm.
Freestanding bathroom vanity units can be fit to a floating floor. This type of bathroom vanity unit will need to be fixed to the flooring first, however a laminate will be unable to float beneath a bathroom cabinet or vanity model.
You'll need strong walls for Floating Cabinets
Since floating cabinets are attached to the walls, they don't have the support of a base. This means the walls need to be able to support the weight of the cabinet, plus a countertop and even a sink in some areas of the kitchen.
NO. Never install cabinets on top of floating flooring. Based on seasonal changes in humidity, the flooring material needs to expand and contract. If that can't happen, the weight of the cabinets can cause the flooring to buckle and damage the flooring's locking systems.
Disadvantages of Floating Vanities
Floating vanities tend to have less storage space than freestanding designs because the cabinets don't go all the way to the floor. However, this can be mitigated with modular wall storage solutions that can be designed to coordinate with the vanity.
Be sure to choose an underlayment that has a vapor barrier, such as Vapor Barrier 2-in-1 Underlayment. However, if you're installing a flooring that has pre-attached underlayment, you should use an underlayment without extra padding, such as Visqueen Vapor Barrier Block.
You can install vinyl plank flooring underneath a bathroom vanity (unless the manufacturer advises against this, for warranty reasons). But, generally speaking, bathroom vanities can be installed directly over the subfloor, so covering the area with flooring first seems like unnecessary work.
Yes, Vanities Should Be Attached to the Wall
The reason for this is to hide and protect your plumbing. Most of the time, plumbing comes through the wall underneath the sink, and the vanity's cabinet keeps it hidden.
Generally, flooring contractors prefer that the cabinets go in first so that there is less possibility of the floor getting scratched. Cabinet installers like the floor to be in place so that the cutting and dust from the floor installation will not damage the vanity.
NKBA designers recommend a 30″ clearance between the front edge of a fixture, such as a vanity or toilet, and any other fixture or wall. The building code allows for a minimum of 21″.
Floating Bath Vanity Hold:
Factors such as mounting method, wall structure, and installation quality affect a floating bathroom vanity's weight-bearing capabilities. On average, a floating bath vanity can typically hold between 100 to 300 pounds of weight.
It is not essential to tile behind a wall hung bathroom vanity unit, but it is possible to do if that lines up with your personal preferences. Many would-be renovators will prefer to begin upgrading their bathroom by first tiling the wall before adding a bathroom vanity unit to complete the look.
Backer Rod and Caulk
One of the best ways to fix the gap between the vanity and the wall is to use a backer rod and caulk. Before getting the rod, you must carefully measure the gap to get the right dimensions. Taking this measurement ensures you get a rod that fits perfectly without cutting or shaving it first.
If you are installing luxury vinyl planks in wet areas such as laundry rooms, bathrooms, or kitchens, installing a waterproof underlayment can give you extra peace of mind. If there should be a spill or a plumbing leak, you can be assured that the water will not penetrate into the subfloor and cause structural damage.
For floating floors, like loose-lay vinyl sheet or rigid vinyl planks, a vinyl flooring underlayment may be required as a vapor barrier and can also add much-needed cushion and warmth underfoot. You may also want to look for an underlayment designed for moisture mitigation and insulation.
Most vinyl floors don't need an underlay. If the surface you're laying on is level and smooth, a well-cushioned vinyl floor should be fine on its own.
Underlayment for laminate flooring is a must. Since laminate is a floating floor, it must be evenly distributed across your subfloor. Underlayment is what allows the floor to float, gives it stability, support, noise reduction, and supports the locking systems in between planks to assure the sturdiest flooring project.
The answer will vary depending on the material used for the floor and the way that the boards are constructed, but, as a general rule, both laminate and engineered timber floating floors do need some form of underlay to have optimal functionality and longevity.
Laminate flooring is designed to be a floating floor that may be installed over virtually any type of sub floor. And by “floating”, we mean that it doesn't need to be nailed or glued to the sub floor.
The wall hung units are not designed to support the full weight of a person, no matter how big or small they may be. This is extremely dangerous because floating vanities tend to have less support than cabinet options.
According to Angi and HomeAdvisor, vanity installation costs range from $300 to $3,800, with many homeowners spending about $1,500. For those who don't have the budget to cover a full bathroom remodel cost, replacing a bathroom vanity is an easy way to change the look and improve storage space.