Generally speaking, you should clean your kitchen cabinets with water or simple dish soap with a soft clean cloth. You definitely want to stick to more common cleaning agents such as baking soda and vinegar. For certain, it should always be something non-abrasive so as to not mar the surface of your cabinets.
Instead, prepare your own gentle cleaner by mixing one part mild dishwashing soap with two parts hot water, or the same ratio of distilled white vinegar to hot water. (When cleaning greasy kitchen cabinets, warmer water helps soften the grunge so you'll be able to wipe it away more easily.)
Mix equal parts water and vinegar for wood cabinets and spray on the wood. Wipe with a soft cloth. Painted cabinets will shine again by rubbing vegetable oil on them.
Dawn recommends adding a few drops of detergent to a bowl of warm water for general cabinet cleaning. For stubborn areas, it says to squirt detergent directly onto a sponge or cloth while holding it under running warm water. Test the cleaner on a small, inconspicuous area before you commit to cleaning everything.
Simple solutions of dish soap and water can do wonders for cleaning away grease, splatters, and food messes. Dawn® Platinum makes cleaning kitchen cabinets So Dawn Easy! The unique formula quickly breaks down grease particles while staying gentle enough to not cause any damage.
Fill a bowl with warm water and add a few squirts of dish soap. Use your hand to mix it around. Take your sponge and wipe down the sticky areas. Let it sit for about a minute and scrub the areas with the grease.
PREPARE YOUR CABINETS
You'll want to get two buckets that are large enough to swish a rag around in the water to shake it of excess dirt, and you'll also want a good natural wood cleaner. Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
Krud Kutter is my number one pick for degreasing cabinets! It's easy to use with a simple spray and wipe off method and it has a mild smell with no lingering scents. It's very effective in cleaning a grimy, greasy surface, and I found it works perfect for kitchen cabinets.
Your kitchen cabinets are sticky after cleaning because you may have used the wrong cleaning products. Additionally, residue might still be left on the surfaces that haven't been removed through wiping, or the cabinets have not dried properly.
Baking Soda
After wetting your brush with warm water, add a little baking soda, then scrub away on the cabinets. Follow with a damp, warm cloth to remove the residue. Not only will the baking soda cut through the grease, but it's also non-abrasive, so it won't harm your wooden cabinets.
Mix up a 50/50 combo of water and baking soda until you have a paste. Apply the paste to grease stains with a clean microfiber cloth using small, circular motions. Swap out cloths as they become soiled, and continue until you have a grease-free surface.
Water (with a pH of 7) and dish soap (with a pH between 7 and 8) are always good options. The best cleaner, the one that is less likely to do damage to the wood is good old-fashioned elbow grease. Applied with a damp cloth, elbow grease should be effective at removing dirt and dust and even oil and grease build-up.
They are both acidic and great for taking the grease off kitchen cabinets and even other surfaces around the kitchen as well. The acidic nature of vinegar breaks down the organic compounds that leave stains in counters, tubs, and sinks. When mixed with baking soda, they make the perfect deep-seated dirt buster.
General Wood Cabinet Cleaner
4 tablespoons white vinegar. 8 drops Blue Dawn. Warm water to fill the bottle (about 2 cups)
How do you clean sticky wood cabinets? The sticky residue you feel is the grease particles that float in the air while cooking and then attach to the cabinets. I use Murphy's Oil Soap and a little water. Be careful not to rub too hard or you'll rub off the finish.
You can make a paste of baking soda and lime juice and dab onto coffee stains, wait for some time, then rub off the stain with a soft sponge. Never use scouring pads or abrasive cleaners as they damage the laminate's finish. Metal kitchen cabinets – These cabinet types usually have an enamel finish.
For heavy cleaning, dilute 1/2 cup Murphy per gallon. Clean well with wrung-out mop, and mop any excess water. No visible residue, no rinsing required.
If you have a bottle of Murphy's Oil Soap under your kitchen sink or in your laundry room that you use to clean your hardwood floors, go get it and throw it in the garbage. Seriously, stop using it today. You can use it for other projects like furniture or cabinets but NEVER for wood floors.
Linseed and tung are 2 of the most common drying oils used on wood cabinets, but you can also use lemon, orange or walnut oil. Vinegar-based solutions. Vinegar is a great cleaner for many surfaces, but wood isn't one of them.
Greasy Cabinet Cleaning Method: Castile Soap + Baking Soda + Vinegar. The method: Fill a 32-ounce spray bottle with a cup of white vinegar, a few drops of castile liquid soap (we like Dr. Bronner's concentrated version), a tablespoon of baking soda, and water.
Mix equal parts of vinegar and water in a cup. The acidic solution helps remove sticky residue and worn out varnish from your table. Dip your sponge into the solution and start wiping down the table completely.
CLEANING PRODUCTS FOR WOOD FURNITURE
A gentle, water-based solution such as Murphy® Oil Soap Original works well when cleaning and protecting the finish on your wood floors, furniture and cabinets.