The answer though is that flooring is one of the last things to be installed in most cases. you can do floors+ceilings in any order. typically the floor is last, but you can put down cardboard or sheeting to protect it while the rest of the work is done, if that fits into your process better.
If you don't it looks like crap – that simple. When installing tile on the ceiling you want to install the tile on the shower walls all the way up to the last row before the ceiling – as I've done in these photos.
To save on all the cleaning, it would be best to do the floors first. If you do the walls first, you'll end up hiring someone to clean all the floors once the wall paint is done. If your company is trying to save money, this might not be the most cost-effective strategy.
Whilst you can tile either one first, popular opinion based on experience is that is is easier to tile the walls first and then the floor, if you are tiling both in a room. This ensures that you keep the floor tiles cleaner as you won't be doing so much work around them once they are installed.
When you're hanging drywall and installing new flooring, it's usually best to hang the drywall first and then save the floor for last.
Baseboards are usually installed before flooring with a reservation gap left at the bottom of the baseboards for the flooring to be slid underneath. The gap left under baseboards for flooring is dependent on the width of the flooring being installed.
Make sure the rows are level and the top does not have a tiny sliver at ceiling and adjust as necessary. I would Typically start at the bottom and work my way up. I ran into an oldschool Italian tile installer and he said he starts at the ceiling and works his way down.
The right way.
Tile walls first, except for bottom row. Nail or prop timber rails on walls to hold tile job up until dry. Then tile floors all the way to bare walls. Then take rails off and tile bottom row of walls.
tile your walls first, then install the bath,sink and toilet, check for any leaks, when you are sure there is no leaks THEN tile the floor, and the adhesive you are planning to use, take it back to where you bought it and buy some proper adhesive and grout mate.
Some people ask the question, “should I lay the floor or install the kitchen units first then lay the floor around them?” This decision is purely down to personal preference. Laying the floor first would appear to be the best option but you are much more likely to damage the floor whilst the kitchen is being assembled.
It's always advisable to start tiling your grid in the centre of the wall, as it's easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.
Place the tile in one of the corners that your perpendicular lines created in the centre of the ceiling. Move the tile back and front so that the mortar adheres to the ceiling. To keep the tile in place, hold it there with some painter's tape. Don't tape in the direction of your tiling.
The bathroom fitters are unanimous—if you're looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
As a whole, most experts agree that shower tiles should go to the ceiling. Tiling all the way up to the ceiling keeps the areas surrounding the shower clean and dry. It also has some visual benefits such as making shower space feel larger and more modern. Floor-to-ceiling tiles may not be right for every bathroom.
If you tile the floor first you may accidentally damage the new floor by dropping things on it. This may result in cracked tile. Or, difficult-to-remove mortar drops when tiling the wall. If you prefer doing the shower floor first, you can avoid accidental accidents by covering the new floor tile.
The tile installation principle is that the tiled wall 'hangs' over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be 'sitting' on the bathroom floor.
When you install ceramic tile on the floor, you must take care to create an expansion joint between the walls and the tiled floor. The Tile Council of North America recommends at least a quarter-inch gap between the tile floor and the walls. Never fill this gap with grout, because tile grout is not flexible.
How wide should the gap be between the laminate flooring and the walls? You should leave a 10mm gap between the laminate flooring and the walls on all sides. The same applies to other solid objects such as doorframes, heating pipes, stoves and radiators that are flush with the floor and furniture.
Minimize small cuts
Usually, no cuts smaller than half size should be made. Make all cuts on the outer edges of the field.” Normally, common sense would tell you not to install a lot of small pieces into the installation which would look bad and reflect poorly on the installer.
When you tile the other side of the corner, the tiles should overlap, but make sure you leave a clearance gap between them (place a spacer). Next, use caulk to fill the corner gap, as a regular grout isn't flexible and would crack in a few months.
Always tile the back wall first in a shower/tub so that you can hide the grout joints on the sides.
Baseboards are often installed before flooring, although it depends on the type of flooring being used. It is necessary for carpeting to have the trim in place, allowing the edges to be tucked under and out of sight. However, for hardwood or laminate, it is easier to install the trim after.
The answer to the question is, “do the floors first!” Here's why: Removing and replacing flooring or carpeting is dirty work. If you paint first, and then do floors, there is a good chance that a lot of dirt, dust, sawdust or tile/stone dust will end up on your freshly painted walls and trim.
You want to install your trim before the carpet. This will make it much easier to paint or stain the baseboards without worrying about dripping on or ruining the carpet. The good news is that people actually install carpeting and trim in either order, so there isn't any big reason to worry about it.