How to Remove Toilet Bowl Rings Using Commercial Cleaners. This method is intended to remove stains caused by mineral buildup. Consider using Bon Ami, Bar Keepers Friend, or The Pink Stuff, which are commercial cleaners that work well to remove toilet bowl rings.
Instructions: 1. Pour about 1 cup of baking soda into the toilet bowl. 2. Follow with 1-2 cups of white vinegar. 3. Let it fizz and sit for about 30 minutes. 4. Scrub the bowl with a toilet brush, focusing on the ring. 5. Flush to rinse.
Instructions: 1. Pour about 1 cup of baking soda into the toilet bowl. 2. Follow with 1-2 cups of white vinegar. 3. Let it fizz and sit for about 30 minutes. 4. Scrub the bowl with a toilet brush, focusing on the ring. 5. Flush to rinse.
The holes that release water into the bowl, on the underside of the rim, are probably very dirty. Fecal matter gets caught up in these holes and bacteria grows. It is really hard to thoroughly clean up under the rim, and when the water drains into the bowl, it carries this bacteria with it. This leads to the ring.
Bon Ami, Bar Keepers Friend, and The Pink Stuff are mild abrasives that are particularly effective at removing mineral and rust stains from hard, nonporous surfaces. While mineral deposits are usually the culprit when unsightly rings form in a toilet bowl, bacterial formation is also common.
Avoid using cleaner tabs—they often contain bleach, which is a no-no for cleaning toilet tanks because of bleach's corrosive properties. Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so.
Get rid of toilet rings with magic erasers
Cut off a quarter of a magic eraser and drop it into the toilet water. Let the piece sit in your toilet overnight to work its… well, magic! Do not flush the magic eraser down the toilet ! Remove it in the morning, then flush to rinse away any residue.
If CLR Grease & Oil Remover is left on a surface for too long it begins to dry and can be very difficult to remove.
Using this method regularly can help keep your toilet clean and hygienic. Additionally, you should use bleach or other cleaning products for tougher stains or odors. However, it's important not to leave the vinegar in the toilet overnight as it can damage the porcelain and reduce its lifespan.
Final Verdict. The best overall hard water stain remover is CLR Brilliant Bath Foaming Action Cleaner. It was highly effective at giving our kitchen and bathroom surfaces a shiny and smooth finish, without requiring a lot of hard scrubbing.
Over time your toilet water can cause an unsightly rainbow of stains and mineral build up in your toilet bowl. CLR Calcium, Lime & Rust Remover helps you flush the filth away. Before you get started, always use gloves and check if CLR is suitable to be applied on the material you are trying to clean.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Baking Soda and Vinegar
Baking soda is also a mild abrasive, so it will remove stains and grime from your toilet bowl. To clean your toilet, use one cup of baking soda with two cups of white vinegar. Brush it into the bowl, let it sit for five minutes, then flush again with the water on full force.
Vinegar and Baking Soda Solution – If you want a natural solution for cleaning toilet bowl stains, made with vinegar and baking soda, start with the vinegar. Pour a cup in your bowl and swirl it around with the toilet brush. Then add 1 cup of baking soda and another cup of vinegar. Leave to soak for up to 30 minutes.
Hydrogen Peroxide: A Super Toilet Cleaning Hero
Hydrogen Peroxide is a DIY toilet bowl cleaner. Pour 1/2 cup of this disinfecting superhero right into the toilet. For additional power, pour in one cup of baking soda. Let the combo sit for at least 15 minutes, then scrub with a toilet brush.
Don't Use Them On Your Car
Or any other delicate surface, for that matter, like silverware, glass, or metal surfaces. Dry erasers have the abrasiveness of a 3000 grit sandpaper – very fine, but can still mar shiny surfaces – like your stainless steel appliances!
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away.
Baking soda, borax and tea tree oil combine to make a heavy-duty toilet bowl cleaner. Baking soda, borax and tea tree oil combine to make a heavy-duty toilet bowl cleaner.
To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl. While the mixture is bubbling up, scrub the bowl (get under the rim, too). Let it soak for 30 minutes and flush. That's it.