You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water. For tough problems, allow 30 minutes before flushing.
Drano® Liquid Drain Cleaner starts working to unclog your drain on contact. After 15 to 30 minutes, clogs are substantially minimized or dissolved. A final blast of hot water flushes away what's left of the clog.
Pouring boiling water down the drain to unclog it most likely won't work. Sure, there's a very small chance it could loosen the clog, but there's a larger risk of softening or melting PVC joints.
It is Extremely Corrosive For Your Drains
When your pipes are clogged, Drano will sit on top of the clog, continually reacting and generating heat until the clog dissolves. This can put a great deal of stress on your drains as the heat can cause PVC pipes to soften and even break or collapse.
Using a solution of baking soda, vinegar, and hot water
For more stubborn clogs, a combination of baking soda, vinegar, and hot water may do the trick. Because vinegar is an acid and baking soda is a base, mixing the two will cause a chemical reaction that will create pressure and possibly dislodge the clog.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water. For tough problems, allow 30 minutes before flushing.
Damage to Plumbing Fixtures
In addition to the pipes, leaving Drano in the drain for too long can damage the plumbing fixtures. This includes the sink, shower, bathtub, and other plumbing fixtures connected to the drain. These fixtures can become corroded and discolored and can start to show signs of wear and tear.
Drano® Liquid Drain Cleaner starts working to unclog your drain on contact. After 15 to 30 minutes, clogs are substantially minimized or dissolved. A final blast of hot water flushes away what's left of the clog.
Homemade drain cleaner can break up even the toughest clogs in your sink. Baking soda, vinegar and Dawn dish soap along with boiling water can safely unclog a drain.
Pour or squeeze ½ cup of Dawn® dish detergent down the drain. For a tougher clog, use 1 full cup. Let the detergent work its way down the drain for 30 minutes.
Once a week, flush your drain by boiling a large pot of water. Pour one-half of the pot down the drain. Wait five minutes and pour the rest. It's a simple thing that can help dislodge any grease or debris lurking in your drain.
Dangerous for your skin, eyes and lungs: Since Drano's purpose is to dissolve organic tissues, if Drano comes into contact with your bare skin, eyes, or mouth, it can cause rashes and even burns if left too long. You must be sure to wash it off as soon as possible and keep your hands away from your face after using it.
The chemicals in Drano may not solve all clogs, and they can lead to a worsening of pipe issues. Drano can build up in a clogged area, and corrode the pipe. With repeated use, these chemicals may eat their way through a pipe, and cause a leak or a collapse of the system.
Single Use, Not Frequent Use
Because of the chemicals found in these types of products, you could cause irreparable damage to your pipes. In most cases, a single use of Liquid-Plumr or Drano will not cause any issues with your pipes, though you should avoid using them in your toilet.
Drain cleaner can linger in your pipes far after even a single-use. This can open up the possibility of other chemical cleaners reacting with it and creating harmful fumes. The chemicals in the product can also pose a major threat to the health and safety of anyone working with it. Drano is caustic.
The thick bleach formula in Drano® Max Gel Clog Remover cuts right through standing water, clinging to your toughest clogs to blast them fast.
Use ½-1 cup of baking soda and 1 cup of vinegar, plus a bit of water if you want to dilute things a little bit more. Pour it down the drain and let it sit for 30-60 minutes. Sometimes, this mixture can break up clogs that even Drano can't touch!
A common cause for clogs, especially in kitchen drains, is a buildup of grease. Soap and hot water can be an effective Drano alternative to dissolve grease blockages. Pour roughly ½ to 1 cup of dish soap down the blocked drain. Following this, pour about a gallon of boiling water, taking care not to burn yourself.
Baking Soda and White Vinegar
This mixture is a great green alternative to Drano because most people have these items somewhere in their kitchen. To use this method, pour half a cup of baking soda into the clogged drain and follow it with a half cup of white vinegar.
Final Verdict. Our best overall pick for drain cleaners is Drano Max Gel Clog Remover, which also comes recommended by experts.
Baking soda and vinegar may unclog your drain better than Drano ever could. Start by getting rid of the standing water in your drain. If it will go down slowly, just wait until it's gone. If it isn't moving, use a cup or a spoon to get it out of there.
If your drain is clogged with hair, baking soda can dissolve hair in a drain. To try this safe and easy method at home - first, pour a cup of baking soda down the drain. Then pour a cup of vinegar (white vinegar) down. Allow the mixture to sit for several minutes.