Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
Copper Pipes. One of the most common things that people use as a curtain rod alternative is a copper pipe. Copper pipes are interesting because they can provide you with a very unique look. Many people are drawn to the look of copper, so using a copper pipe as a curtain rod is going to be appealing.
By styling wooden dowels to look like copper rods, the DIY curtain rods were so inexpensive (just $12 apiece!) that we had money left over to craft statement-making tiebacks to match. Measure your window, then cut the 1-inch wooden dowel to a length at least 5 inches longer than your window is wide.
Here are a few ways you can use rope for your curtains: Create tension in the rope by tying the ends directly to the curtain rod brackets. You can also use curtain holdbacks to secure the rope further down the wall. Avoid hanging heavy drapery when using rope in place of a curtain rod.
PVC pipes pair well with wall hooks or drapery rod brackets. If you want to add decorative finials, insert a cork at each end of the hollow tube to help connect screw-in or pushpin finials, for example. To make returns on either side of the curtain, connect PVC elbows at each end to create 90-degree angles to the wall.
Velcro, which can hold small or large curtains alike, comes to the rescue. Select a Velcro thickness suited to the curtains at hand: A 1/2-inch-wide strip may work for a small, thin cafe curtain, while a thicker strip ensures heavier or long curtains stay in place without peeling away on their own.
A handheld screwdriver works well for the last few turns. Once you have your brackets attached to the wall, you're ready to hang your curtain rod! It's easiest to thread your curtains on the rod beforehand.
The Command hook is perfect for hanging heavier items on your curtain rod. The adhesive is incredibly strong and can hold up to 5 pounds, making it perfect for heavier drapes or curtains. The hooks are also simple to install just peel and stick!
We often get asked the question 'do curtains and blinds work together? ' The answer is, for the most part, 'yes' – when paired, the two can bring out a flexible décor and ensure adequate blocking of light and privacy control.
The adhesive back of the Peel and Stick Velcro will adhere to light fabrics like cotton, polyester, poly blends, and nylon. The hook side on all Velcro will adhere to any fabric consisting of small loops, such as wool, fleece, velvet, and some felt and knit fabrics.
Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour. Repeat the same for the other side. Don't be in a rush.
Dowels and Sticky Hooks
And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.
Adhesive Hooks (on the Ceiling!) –Command hooks might not stick to textured walls, but you can hang curtains from your ceiling using adhesive broom or mop hooks. These can be found at most hardware or home improvement stores. Just stick the flat base on the ceiling, run a curtain rod through the hook or loop and voila!
When using a liquid or hot glue, leave a seam allowance on each side of the Velcro. Turn the Velcro over and apply glue slowly from the center point toward the edge. Remember, liquid glue spreads once the Velcro strip is pressed onto the fabric surface. Avoid glue seeping onto the fabric.
The best that sticks to fabric is fabric tape, which comes in double-sided or single-sided, wide or narrow, clear or matte colors. Many other varieties such as duct tape, gaffer, and Gorilla tape will stick to fabric but will not come out easily.
Fabric-based tape is one option for how to attach Velcro to fabric without sewing. If you're using hook and loop fasteners for a DIY costume or clothing, consider using fabric tape. The fabric tape method is an easy peel and stick process that permanently bonds to fabric without ironing, gluing, or sewing.