When installing a wooden floor, do not place an underlay on the glue. The only element between the substrate and the floorboard is glue. Likewise, when installing using a
Yes, you generally need an underlayment for engineered hardwood flooring, especially if you're installing it as a floating floor. Underlayment helps with sound absorption, adds a bit of cushioning, and acts as a moisture barrier, which is essential if you're installing over concrete or in areas prone to humidity.
If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don't have to worry about which glue to use and how long to wait for it to dry. If you are installing hardwood flooring then using glue may give you a more stable result.
So, do you need underlay below engineered wood flooring? It really depends on the requirements of the project as well as your personal preferences. It has become very popular for engineered wood flooring to be 'floated' over underlay because it's such a quick, easy installation method.
When installing hardwood or engineered wood flooring, the best underlay options are cork and foam. However, foam does have more give than cork so, while it is the more popular option, we recommend cork. Cork has less give, making it less likely to flex underneath your planks.
If you've decided to install engineered hardwoods, there are four possible installation methods depending on the subfloor: glue, nail, staple and float. Whichever method you choose, you'll need to prep the subfloor by cleaning, leveling, and checking and adjusting door clearance.
Foam or cork underlayment helps to reduce noise transmission and provides a cushioning effect, enhancing the comfort underfoot. Plywood or OSB subfloor provides a stable and even surface for the engineered wood planks to be installed on.
Challenging installation
The biggest drawback to glue-down vinyl flooring is the complexity of the installation process. This method requires more skill, precision, and time compared to floating vinyl flooring. Most homeowners choose to hire a professional for glue-down installation, which increases labor costs.
Opt for urethane adhesive for installing wood floors
hardwood floor installation. It creates a strong bond with wood but has elastomeric properties; it will allow the wood floor to move.
At minimum, a full 24 hours is recommended for any type of flooring that is laid with any method. Glued flooring depends on the glue. Most adhesive comes with an instructional manual that varies from product to product. The drying time should be included in the information.
The choice between floating and glue-down installation for an engineered wood floor depends on various factors such as subfloor type, room dimensions, and personal preference. Floating installation offers easier DIY and allows for expansion, while glue-down provides a firmer feel and minimizes movement.
Flatness required as follows- 3/16" in 10' or 1/8" in 6'. Floating floors requirements are more stringent, see section 4.4 for more details. Sand high areas and joints. If the floor is to be glued down, then fill low areas with the appropriate cementitious sub-floor leveling compound.
black felt paper is rolled out over the wood subfloor prior to installing the new floor. This hardwood felt paper is necessary to greatly reduce the chance of any moisture coming up through the subfloor and will help protect the new hardwood flooring.
If you added a layer of underlay between the LVT glue-down flooring and the subfloor, this would break that connection. As a result, there could be movement in the floor tiles which is undesirable. Therefore, underlay is not recommended or required with LVT glue-down flooring.
Without underlayment to add a layer between these damp subfloors and the surface flooring, your laminate can quickly become wet, warped, and mildewy, harming its overall integrity. Moisture over time can also break down floor adhesive which causes the floor to start warping.
The easiest way to determine if you need underlayment for your new vinyl plank flooring is to look at your current floor. If you're laying the LVP over an existing cushion-backed vinyl floor or a below-grade tile floor, you won't need to use an underlayment.
If you want your engineered wood floor to last a long time, you need an even subfloor. Underlays smooth out the subfloor and cancel out minor dips and flaws that might otherwise affect your new floor. The even surface an underlay provides creates more stability for your engineered wood floor.
Plank warping, buckling, or swelling are clear physical signs that moisture has infiltrated your engineered hardwood floors, creating conditions conducive to mold growth.
Ply is generally more durable, stronger and will create the most reliable subfloor for your flooring. High-quality tongue and grooved plywood is your best option, and we always recommend exterior grade ply subfloors for kitchens and bathrooms.
Rubber underlay with vapor barrier
Rubber underlay with combined foil vapor barrier is ideal for laminate flooring and engineered floors that are to be installed using the floating method over concrete sub-floors.