Ceiling decorations are often called ceiling tiles, ceiling panels, or ceiling coverings. They are used to improve the appearance and insulation of a ceiling. Ceiling decorations can be made from various materials, including metal, fiberglass, plastic, or wood.
That is called ceiling texture. Some of them have little bits of paper mixed with drywall compound or gypsum. Some have plaster of Paris or bits of Styrofoam. Some are sprayed thin. Others are sprayed thick and called a popcorn ceiling.
Ceiling Skirting Is Called Coving / Cornice
But we think this is down to many people not actually knowing what coving or cornice is - or what 'that stuff that goes around the top of the room' is actually called.
The parts that make up your ceiling are . The joists, the noggins or struts, lateral restraints , insulation and ceiling board ,coving .
If they're structural supports, they're either joists or rafters; joists are horizontal, running across a ceiling to help hold it up, while rafters are sloped to run along the pitch of the roof. But if the ceiling beams you're looking at are decorative instead of structural, they're simply called wooden beams.
Ceiling joists
These boards are generally 2”x6” boards, up to 2”x12” and are located directly above the drywall ceiling. They will run across the ceiling of each room and be supported on each end by a wall. They are stood up on their thin edge and will usually have some sort of insulation between them.
What are the wood planks on the ceiling called? Wood planks on ceilings have various names, some common names are tongue and groove, beadboard, and shiplap. Armstrong products are named COUNTRY CLASSIC Planks, EASY ELEGANCE Planks, and WOODHAVEN.
Ceiling moulding, also known as crown moulding or cornice, runs along the top of a room where the wall meets the ceiling. It softens the transition from wall to ceiling. Crown moulding can be simple or intricately detailed. These types of moulding trim can make a room look polished.
Ceiling mounting refers to the installation of light fixtures directly onto the ceiling surface. In this type of mounting, the light fixture is attached or secured to the ceiling, allowing it to hang down or sit flush with the ceiling surface.
Ceiling joists are kind of like studs for your ceiling. These horizontal boards form the framing for your ceiling, and they are generally set in intervals of either 16 inches or 24 inches.
Ceiling panels can go by a lot of names, including: Ceiling tiles. Drop ceiling tiles. Suspended ceiling panels.
Coving. Also known as “coves”, ceiling coving is a simpler, more uniform version of cornicing. Both are designed to add a decorative touch to the walls and ceilings of an interior location, but the aesthetic difference will help to inform you of which you are looking at.
Each row of shingles or roofing material is equal to one course. Decking. Roof decking, or sheathing, is the strong layer of wood that is laid on top of the rafters and becomes the base layer for any roof covering. Decks are most often made of plywood sheets or stand board (OSB).
Canopies are frequently encountered in light fixtures that are surface mounted on ceilings, including chandeliers, pendant lights, and flush-mount fixtures. These canopies are typically crafted from materials that harmonize with or enhance the fixture's aesthetic, like metal, plastic, glass, or fabric.
Ceiling joists provide a structure to attach a ceiling to.
If you want a ceiling, there needs to be something to hang it from. Ceiling joists are designed to support the loads a ceiling will place on it.
Space-saving Design: Ceiling-mounted fixtures are installed directly onto the ceiling, which helps save space in the room. They do not occupy any floor or wall space, making them suitable for areas with limited room or low ceilings.
Also known as a recessed or inverted ceiling, a tray ceiling has an inset area at the center that's higher than the rest of the ceiling. It's essentially a simpler and less expensive version of a coffered ceiling.
The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.
Drywall: A paper-covered panel with a gypsum core used as the interior wall and ceiling facing in most homes.
Crown molding
Crown molding is literally what you think—an overhead crowning touch that flares out in the space where the walls and ceiling meet. Also known as cornice molding, it may be elaborate, with decorative cutouts, or simple and linear (Shaker) in design.
Ceiling decorations are often called ceiling tiles, ceiling panels, or ceiling coverings. They are used to improve the appearance and insulation of a ceiling. Ceiling decorations can be made from various materials, including metal, fiberglass, plastic, or wood.
coffer, in architecture, a square or polygonal ornamental sunken panel used in a series as decoration for a ceiling or vault.
Box Beams Are Not Structural Supports
Box Beams are not structural elements in that they are not intended to support the ceiling or in many cases support heavy chandeliers. They are decorative in nature but intended to look like a structural part of the building structure.