The three most common types of toilet leaks are in the flapper, the water supply line, and the wax ring under the toilet. For each type of leak, the first way to try to identify where the leak is coming from is to do a visual inspection. Often, you'll see evidence of water leaks.
The most common toilet leak is caused by a deteriorated flush valve (flapper) at the bottom of the toilet tank. If the flapper does not seat properly, water will leak into the toilet bowl. Often this leak will occur without being heard.
Turn off the water supply valve near the toilet, and check if the water level in the tank decreases. If there is a decrease after 15-20 minutes, the problem could be due to the flapper. There could either be a leak in the flapper, or the chain may be too tight.
Again, leaky water is a telltale and common sign of a bad wax ring. If you do not regularly see moisture or puddling water under your toilet, you may be fine. Leaks can, however, happen where you do not see them, under the finished floor and into the subfloor.
The wax ring usually needs to be replaced because the toilet is loose. The other reason why a wax ring may need to be replaced is that it has been worn down over the years and is no longer pliable. This means the seal is no longer intact. Therefore, it causes water to seep through the base.
Why is the toilet is leaking from the base? The leak is usually caused when the seal under the toilet fails. Below you'll learn how to install a new wax gasket to create a watertight seal between the toilet and the closet flange and install a new flexible water-supply tube.
It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely. When that happens, they need to be replaced.
In theory, the wax ring “should” last the lifetime of the toilet, or certainly 20 to 30 years. We come across situations all the time, however, where wax rings are in need of replacing well short of this scenario.
You should always consider replacing the toilet supply when replacing the wax seal. If toilet is caulked to the finished floor of the bathroom, score the caulking all the way around the toilet base with a razor knife.
A silent leak can be caused by a fill valve set too high.
The fill valve is the part of the toilet that is responsible for refilling the tank after being flushed. Over time, a worn or out of alignment fill valve can become a problem, cause a leak, and wear on valve's components and parts.
Water around the Toilet Base
The first sign of a bad toilet ring is water forming around the base of the toilet. To test that a bad seal is the problem, grab a couple of towels and wipe up the water. Go on with your day, checking periodically to see if the water has returned.
The main signs of a leaking toilet may include a damp area on the floor around the bottom of the toilet, a spongy feeling in the floor at the bottom of the toilet seat, signs of dampness on the ceiling in the room underneath your toilet, or the occasional smell of sewer gas and the flooring coming up in the area around ...
The only-when-flushed toilet leak could be caused by loose mounting bolts or a worn-out wax gasket while the all-the-time leak could be caused by a loose water supply line connection, a problematic water shutoff valve, or a faulty seal between the toilet tank and its base.
$90-$120 is a good ballpark.
If you are having other plumbing work done, they might do it cheaper, and if they have a large travel fee, you may pay closer to $150. Unless there is a problem, it should take them under a half hour, whereas, it might take a novice 1.5-2 hours.
Wax-free toilet seals are made out of a heavy duty rubber, so they're flexible enough to shimmy into the flange without smearing a wax ring. Wax-free seals can also be reused. As long as they're still attached to the bowl in good condition, you can reinstall the toilet without replacing the seal.
🚽 Caulking Prevents Water Contamination
It could be water splashing out of a bathtub, mop water, water from a shower and even misguided potty training from your young boys who seem to miss the toilet bowl every single time! Without caulk around the toilet base, water can get under there and sit for a long time.
In most parts of the United States, it is a requirement of building code to caulk around toilet bases. This could apply to both new builds and remodeling, though as regulations vary from one state to another it's a good idea to check local statutes.
It costs between $150 and $300 to fix a leaking toilet in most cases. The cost would be a lot more if the leak has caused damage to your floor or if it's a recurring problem.
Here are some possible reasons why your toilet is leaking at base anytime you flush: Your fill or supply valves are loose. A cracked toilet tank. The flapper isn't shutting as it should over the valve seat, causing the flush valve to leak.
Determine if the Wax ring is possibly bad by inspecting the floor for water or a foul odor of sewer gas. Use food coloring. If are unsure of where water is coming from you can add food coloring to the toilet tank. If the floor's water is the same color, then you likely will need to install a new wax ring.