Washing machines have 3 hoses: one for hot water, one for cold water, and one is a drain hose. This means there are 3 hoses that have the potential to burst or leak.
Step One: Find the hoses at the back of your washing machine; they connect to both the machine and the water valves. They're usually color-coded, with red for hot water and blue for cold water.
Most washing machines come with the drain hose already attached to the back. It's usually a long, grey hose. Some machines also come with a U-shaped bracket. This is for hanging the drain hose up, which stops dirty water going back into the machine.
Most washing machines will require one hot and one cold water connection during the installation process. The hot water inlet valve will likely be marked red and will connect to the hot water hose. Follow the same process for the cold water hose and inlet valve.
Step 2: Connecting the water Cold fill machines First screw the end of the water intake hose, the one with a right-angled bend to the inlet valve on the back of the machine. Then screw the other end of the hose to the cold water supply valve with the blue tap and turn on the water.
Suitable for hot water, cold water or to drain, they are durable and easy to attach. Available in different lengths and colours, such as red for hot water and blue for cold, to suit the installation requirements and offers great replacement products for refitting or if a longer length is needed.
Identifying Hot and Cold Water Connections
White Inlets: Facing the back of the Washer, connect the hot water hose to the right port on the washer. Above the inlet will be an "H" or the word Hot. Connect the cold water hose to the left port. Above the inlet will be a "C" or the word Cold.
If your new washing machine has been delivered with a cold water hose only, or you're wondering whether your washer can do warm washes if it's only connected to cold water, the answer is yes - in most cases.
Regardless of their condition, washing machine hoses should be replaced about every 5 years to prevent a flooding emergency. Standard washing machine hoses are made of black rubber. Unfortunately, these hoses only last a few years and will eventually fail, causing one big mess and costly water damage.
Before you start, check your washing machine or dishwasher is compatible with these fittings. Connect the machine's blue hose to the cold supply, and the red hose (if it has one) to the hot.
The Hot and Cold water line connections are on the back of a washer. These Hot and Cold connections are designated on the washer as follows: 1995 and newer - Hook up the Hot to the connection that has a “H” next to it and hook up the Cold to the connection that has a “C” next to it.
If you're using a pre-wash cycle for heavily soiled clothes, put a small amount of detergent in the pre-wash compartment, usually marked with "I". Then, place your main detergent in the main wash compartment as usual.
Using vinegar in laundry is simple. You can add it to the fabric softener dispenser in your washing machine or pour it in during the final rinse cycle. When adding vinegar towards the end of the cycle, manually pause your machine right before the final rinse cycle and add a 1/2 cup of diluted white vinegar to the load.
Don't put detergent in the fabric softener drawer
For one thing, it would miss the actual wash cycle. Putting detergent in the wrong compartment can also result in detergent residue remaining on the fabric, which can cause skin irritations, according to the IKW.
Ever wondered which side the hot water tap should be on? Well wonder no more. The hot water tap is on the left and the cold tap on the right. This rule applies to mixer taps as well with the handle positioned to the left for hot and right for cold water.
WHICH WATER SUPPLY SHOULD I CONNECT MY WASHING MACHINE TO? It is possible to connect your appliance to either but we strongly advise connecting your machine to a cold water feed. This will ensure that the machine works more efficiently and you do not waste hot water during cycles such as the rinse stage.
Try to group colors together – wash pastels in one group, then separate reds, oranges and yellows from green, blue or purple items with darker hues. If your brights are brand new, wash them separately for the first few washes to help keep them from bleeding dye onto other clothes.
You need to purchase the hot and cold water hoses separately.
Stainless Steel Braided Hoses
Stainless steel washing machine hoses are considered the best option due to their exceptional durability and resistance to kinks, punctures, and external damage. These hoses feature an inner rubber tube encased in a braided stainless steel jacket for added protection.
The washing machine has hookups for two water lines on the back, one for hot water and one for cold. These lines are hooked up to the body of a solenoid valve.
Installing a washing machine is quite straightforward as long as you have the right instructions in front of you.To help make installation easier, we've created the below video for you to easily follow if you would prefer to install your new washing machine yourself.
Some models will have an emergency drain hose located next to the filter. Pull the drainage hose out and remove the stopper. Once this is removed, drain the water into a container before refitting the stopper and placing the drainage hose back.