Cleaners aren't meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
You've just bought one of the top automatic pool cleaners, and you've let it work its magic. Now that the cycle is done, should you leave it in the pool or take it out? The short answer is that you can leave it in the pool, but you shouldn't.
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
It will clean for 4 hours and then turn off. The filter then needs to be cleaned out. Don't leave it in when swimming.
Manual Model. A manual vacuum should be run as long as it takes to remove all visible dirt and debris on the bottom and sides of the pool. For a small, well-maintained pool, this usually takes around 20 minutes. For a very dirty small pool, or a maintained larger pool, it may take around 45 minutes.
The rule of thumb for pool maintenance is to run your pump for eight hours per day.
In moderate climates 4-5 hours a day is enough. In cooler climates less, and warmer climates you may need longer. If you have a pool cleaning service you may not even need to run the cleaner every day, though you should run the pump for a few hours nevertheless.
All Kreepy Krauly cleaners are have an inbuilt steering system, coupled with a unique Ultra Flex Hose to give the cleaner the freedom to travel all over your pool.
In The Industry
The 360 does not require a booster, but usually has a three way valve off of the main pump that feeds it. Most have a filter bowl on the Polaris return line near the pump. No problem with leaving the Polaris in the pool when not in use.
Ideally, you need to run your robot pool cleaner daily or at least once a day if you're always swimming in it. But if you don't swim in it as much, run it at least once weekly or every two weeks. When you're using a swimming pool cover all the time, you may wash your pool monthly.
Amazon.com: Customer Questions & Answers. Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.
I have owned a Dolphin Nautilus for about 4 years now. It cleans like a champ. My usual routine is to wait until the bottom of the pool is noticeably dirty before I run the robot. Generally, this may be once a week if the wind is not blowing too many leaves into the pool, twice a week if it is.
Regular Maintenance will often be once a week, unless you are a pool owner with heavy usage. Getting on a weekly cleaning routine will make vacuumings faster and help keep algae from sporing.
Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
If you want to keep the pool clean, you can run the 280 for as long as you want, but it will wear out quicker if you run it a lot. It takes about 3 hours to clean a standard pool.
The manual says you should put it away after each use and I usually do. I haven't seen any adverse effect from leaving it in the pool occasionally.
If your Kreepy Krauly is often stuck at one side of your pool there are two potential fixes. If the hose is too short then buy another line and have it extended out enough to cover the pool. On the other hand, if it is constantly being coiled then relaxing it or changing how you keep it stored will fix that problem.
Check to ensure the dive float mechanism is operating freely and the dive float restrictor is installed. Check the automatic regulator valve (shown here) for proper installation and ensure it is not clogged with debris. Make sure the water level is at the proper level, not too high or too low.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
One very important rule to remember: Just because pool water is clear doesn't mean it is sanitary or in proper chemical balance. Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
However, if you don't have a lot of debris, such as leaves, bugs, etc. or if you have a screened in pool, once a week should be sufficient. Vacuuming helps control the pH level in your pool much easier, so it's a great regular maintenance and cleaning task you can do to keep your pool clean and safe.
If debris isn't removed promptly, it can wreak havoc on your water quality and lead to maintenance issues like algae. A pool vacuum makes short work of heavy debris, helping you keep your pool clean and inviting and preventing maintenance headaches.
Vacuuming is necessary to pick up the dirt and debris that has found it's way to the pool bottom. While your filter does a good job circulating the water and chemicals, it doesn't always catch all the dirt. Sometimes it settles to the bottom. The only way to clean this is to vacuum.