Increasing the fan speed enables more air to pass through the air conditioner. We recommend to set the fan speed at high levels at the start of cooling (or heating), when the room is much warmer (or cooler) than the set temperature. At night, the air conditioner can be set a lower level.
Set the fan speed on high, except on very humid days. When humidity is high, set the fan speed on low for more comfort. The low speed on humid days will cool your home more effectively and remove more moisture from the air because of slower air movement through the cooling equipment.
High is usually most effective for cooling during normal warm weather. However, when it's very humid, it's better to keep the fan on low. This cools most effectively because it circulates the humid air slowly and steadily through the air conditioner, allowing it to dehumidify the air more efficiently.
Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.
Cold air is denser than warm air, so it sinks to the bottom of a room. This means that an AC that is installed closer to the floor will be more efficient than an AC that is installed higher up, because it will be able to cool the air more effectively.
"AUTO" is the more energy-efficient option, as it runs the fan only when heating or cooling is actively needed. "ON" keeps the fan running continuously, which can help with air circulation and filtration but may consume more energy.
Since 72 degrees is generally agreed upon to be an ideal indoor temperature, most people would probably still feel comfortable setting their AC units slightly higher than this, perhaps at around 75.
As we stated in a few sections above, it's very important to keep your air conditioner's fan on the auto setting. Some of the reasons behind this choice include: Lowered energy consumption: When your air conditioner's fan is set on auto, it will only run as needed.
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
In fan mode, your air conditioner will circulate air in your home without changing the temperature. This is useful when you want to just keep the air circulating without running the compressor and using energy unnecessarily.
You might think a taller fan or a fan on an elevated surface is your best bet to cool a room, as it attacks that higher-up hot air, but as Lasko points out, a fan situated lower to the ground can actually pick up the “refreshing chilliness” lingering down there and push it out.
As mandated by the Ministry of Power, Government of India, all AC manufacturers must fix the default temperature setting at 24°C. So, it is better to set the right temperature at about 24-25 degrees Celsius. This will help in cooling the room faster.
In a 10 feet high room, a split type AC should be installed at 7 -8 feet for the best cooling performance. For a window type AC, the best height is 3-4 feet from the floor. If you are fixing the AC very close to the wall or in an airtight room it will trip due to high head pressure, as heat dissipation can't happen.
Airflow: Blowing volumes
Fans optimized for high airflow are often used to move larger amounts of unrestricted air across a broader area. This makes them perfect for general case cooling or directing air towards hot spots without obstructions.
Using your ceiling fans and AC unit simultaneously can help save you money on your monthly cooling bill. According to the Department of Energy, if you use air conditioning to cool your home, a ceiling fan will allow you to raise the thermostat setting about 4°F with no reduction in comfort.
AUTO is significantly more energy efficient between the two modes since the fan is only running when your AC is going through its cooling cycle. This takes less power, which is more budget-friendly, with some estimates showing you can save as much as $50 per month just by keeping your AC on AUTO.
There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.
If your air conditioner isn't keeping up with the heat, your air filter may be to blame. A dirty air filter can obstruct the airflow path through the unit. Using a dirty air filter can also cause less energy efficiency and more costly utility bills.
Setting the fan speed too low will usually cause the evaporator coil to freeze. If the fan speed is too high, it can cause the AC condenser to short-cycle or turn on and off constantly. This puts a huge amount of stress on the unit and also results in greatly increased energy costs.
WHAT IS THE BEST MODE FOR AC IN SUMMER? In summer, the best mode for your air conditioner is the "Cool" mode, set to a comfortable temperature around 78°F when you're home. This setting efficiently reduces indoor humidity and maintains a comfortable environment without overworking the AC system.
Automatic for the People
One major benefit of using the automatic fan setting is that you save energy by shutting it down when the AC isn't doing its thing. This also means that your fan motor will last longer before you need to service it because it's not running all the time.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
If the temperature is set to 74°F but the thermometer shows 78°F, you will have to recalibrate the thermostat to account for this 4-degree deviation. Even with older AC units or furnaces, you might have to recalibrate your thermostat from time to time.
Recommended AC Temperature for Sleeping
The Sleep Foundation says 65° is the best temperature for sleeping. However, if you prefer a slightly warmer or cooler room, that's okay, too. The recommended range is 60–68°, so there is some wiggle room.