First of all, you do not have to enclose your pool equipment (pump, filter, heater). A lot of people camouflage it with landscaping or a small fence, so that is not visible. Pool equipment is designed to be outdoors. As long it is taken care of and properly winterized at time of pool closing, it need not be covered.
Even if you turn off the power to your pool equipment, it can still be damaged by wind, rain, and debris. To avoid damage, we recommend covering pool equipment with a large plastic tarp or waterproof coverings. Ensure that the covering is tied down tightly to avoid water from getting to the equipment.
Protect the pump motor from water damage
In addition to removing circuit breakers, consider moving the motor indoors or covering it with a waterproof material to prevent water from getting inside.
Yes. The best way to remove ice and water from the swimming pool cover is to use a cover pump. Either before the water freezes or when the ice melts use the pump to remove the ice/water from the cover.
Make certain the main pool pump is running continuously while the temperature is below freezing. You should have a freeze protection device that will automatically turn the pump on when the temperature drops to around 34 degrees.
It is entirely safe to run your pool pump when it's raining – most of the time. Running your pool pump during rain should not affect the pumps' ability to do the job it was designed to do.
Is It Safe To Run The pool Pump With The Pool Cover On? It is safe to run the pool pump and filter with a swimming pool cover on. The pool cover doesn't in any way stop or hinder the pool pump from circulating the water or carrying out its function.
While covered throughout winter, water is sure to build up on the pool cover. This is when a cover pump is essential to keeping water off the cover. Automatic pumps can be left on the cover. But Aqua Pools recommends removing the pump, including the hose, and bringing it inside during freezing weather.
A simple canvas cover or tarp with tie-down straps can be used to cover the filter, but should be removed prior to the commissioning of your swimming pool or, at minimum, the startup of the filter. A properly winterized filter shouldn't crack.
Water accumulation can damage pool covers
Even the smallest amounts of water can add up, putting pressure on the seams of the cover and starting to weaken it. This pressure can cause rips in your pool cover and even make the cover collapse into the pool.
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
Covering a heated swimming pool at night will reduce heat loss. That means warmer water, which is what anyone who has ever gone swimming in a chilly pool can tell you is very important.
A swimming pool cover keeps rain and debris out of an outdoor pool when it's not in use. It also effectively maintains the water's temperature and prevents evaporation as well. However, it's challenging to remove the pool cover, especially when it's full of rain.
With spring on its way, it's time to open up your swimming pool once again. A lot of debris can accumulate on top of your pool's safety cover during winter. As the snow melts, there will likely be all sorts of leaves, twigs and other debris that will need to be cleaned from the cover.
So pool owners must add and remove the pump manually from the cover. Do not leave the pump on the cover. Freezing could damage the pump.
So if you have to leave it running for a week it shouldn't make a big dent in the electric bill. Having to spend the money on getting the pool back in shape will probably cost more than leaving it on anyway. I would make sure you fill the pool water as high as you can though since you will be gone for a week.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
While you may be using your swimming pool less frequently as fall activities start to take over, there is one important thing to remember: Do not turn off your water pump.
Keep it on a low shelf so it won't fall or roll. If you keep your motor outdoors all winter, you could build a 'lean-to' with lumber or plastic for snow, rain and tree branches, but keep good air flow around the motor, and don't wrap it in plastic, which traps moisture inside the motor.
Suggest Insulating the Pool Equipment Housing
A more cost effective way to reduce the noise of a pool pump is to insulate the pool equipment housing yourself. Simply line the walls of the pool equipment enclosure with acoustic insulation or for a free alternative, try old carpet. You can get acoustic insulation here.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.