For example if you have a painted finish on your wooden floor then stripping will likely be more effective, however if you want to remove a basic polyurethane finish and you need to do so during the colder months of the year then sanding will be more appropriate.
Sanding is usually better than stripping. To begin with, stripping is a lot more work than stripping with a paint-and-varnish remover, except in cases where the old finish has flaking off.
You need a pristinely clean floor before sanding, so sweep it and then dust mop it to get up all debris and dust. Make any necessary repairs to gouges and cracks in the floor before sanding. Use a drum sander for your first sanding pass on the floor. Sand the center of the room first, and then finish with an edger.
Refinishing vs.
Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).
Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Though you can sand your traditional hardwoods, it's difficult or even impossible to sand prefinished or laminated wood floors.
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project ...
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
So then I point out that stripping is faster, and in the case of paint could even be safer than sanding. It's almost always better to strip than to sand. To begin with, except in cases where the old finish is flaking off, it's a lot more work to sand than to strip using a paint-and-varnish remover.
Sanding wood floors is a time consuming but relatively easy procedure. Sanding wood floors & refinishing yourself will definitely save money, and even an inexperienced homeowner can likely do a better job than the lowest bidding handyperson who quotes on it.
Apply a paint stripper to your floor. If you want to remove just the varnish and not the paint, use a liquid stripper, applied with a paintbrush. Do not pour the liquid directly onto your floor, as wood is highly sensitive to saturation. Alternately, you can use a spray stripper, available in aerosol cans.
Conclusion: Chemical stripping is your better option for a veneered piece. If you have sanded veneer and feel comfortable doing, it can certainly be done, just be patient, start at 100 or 120 rather than a 60 or 80 grit. Don't press hard with the sander, let it do the work. Check your paper for finish build up.
However, they might be surprised to learn that most professionals will tell you that stripping is often easier and safer than sanding. If you have a hand-me-down piece that you would like to restore, you can save a lot of time and frustration, and even avoid risk, by choosing to strip rather than sand.
If you are stripping several layers of stain from a hardwood floor, a strong solvent based stripper is best. But for lighter jobs, citrus and soy strippers are a great option.
Typical costs: Installing a standard solid-strip hardwood floor averages about $8 a square foot for materials, insulation and site finishing, and up to $12 a square foot for wide pine planks, or $1,150-$1,750 for a 12x12-foot room.
Installing hardwood flooring averages between $6 and $12 per square foot. Wood flooring costs $3 and $7 per square foot for materials and about $3 to $5 per square foot in labor to install.
You can undertake to refinish yourself — but the professional treatment is sure to leave you most satisfied. Resurfacing your floor involves more than just putting a layer of polish on top. It may require removing old floorboards, grinding down uneven boards, and reinforcing wood planks with new nails.
Let's get started. As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. Depending on how the painters prepped your base, you can actually cause more damage to the base and walls by removing it.
If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it's often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.
The palm sander is definitely the most common tool for sanding a wooden floor by hand. Palm sanders also oscillate, however, unlike orbital random sanders, the pad of the palm sander is fixed straight.
Sanding hardwood floors doesn't have to be messy. If you've decided to install sand-on-site hardwood floors in your home, or if you're preparing to re-sand existing hardwood floors, you're undoubtedly excited about how great your new floor is going to look.