Toilets can develop drain clogs for any one of several basic reasons, usually involving partial or complete obstruction in one of the various parts of the drain system: the toilet trap, the branch drain line, the vent pipe, or the main sewer line.
We recommend you add a cup of baking soda to your blocked toilet and wait for some minutes. Next, pour two cups of vinegar slowly into the toilet. Vinegar and baking soda will typically react to form bubbles, so ensure you pour carefully and slowly to prevent the toilet water from overflowing or splashing.
The longer you leave a clog, the more opportunities there are for the clog to get worse. The most water-soluble parts of the clog will dissolve, and the rest will fill in the gaps, making the clog worse. There is also the possibility that human error could come into play.
Is it okay to leave a clogged toilet overnight? In most cases, you can leave a clogged toilet overnight. However, calling an emergency plumber near you might be warranted if water starts leaking from the pipes. A simple clog likely won't cause this, but an inexperienced homeowner messing with the plumbing could.
If you can't unclog the toilet using a plunger or a snake, your next best option is to use boiling water. Boiling water can help to dissolve the clog and free up the pipes.
You may just be using it incorrectly. Do this: Next time you have a clog, use your plunger like this: Ensure the flange lip is unfolded. Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.)
When a toilet has a clog made of water-soluble materials, it has a chance of slowly dissolving in the water and freeing up the toilet to work properly again. So, clogs that are primarily made of toilet paper can clear themselves.
First, shut off the water supply to the toilet. To do so, find the valve mounted on the wall behind the toilet. Turn it until the water flow stops. If you can't find the water shut-off valve, lift the top of the tank and lift the float ball high enough to stop the flow.
Sometimes clogs cause a toilet to slowly drain its bowl. You cannot plunge a toilet that is empty, so if there is no standing water, use a cup to fill the toilet with water from your sink. If the toilet is empty, take the opportunity to use hot (but not boiling) water, as high temperatures can help clear clogs.
Pour 1 cup baking soda and 2 cups vinegar into the toilet.
Distilled white vinegar is commonly used, but any type of vinegar will work. The mixture will fizz a great deal. If you don't have baking soda and vinegar on hand, try adding a few squirts of dish soap to the toilet bowl. The soap may help to loosen the clog.
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick the chemical from the local hardware or grocery stores. Pour a ¾ gallon of cold water into a bucket, and add 3 cups of caustic soda.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water.
How to Tell if Your Toilet is Clogged. Signs that your toilet (or sewer line) is blocked include: The water does not flush properly, stays in the bowl for long periods or ends up overflowing over the top of the bowl. When the toilet is flushed, water starts to gurgle up in your shower or bathtub drain.
Attempting to force a clog through a toilet with a plunger can often make the problem worse. Instead, create a seal and slowly push down on the plunger before pulling it back sharply. The suction can help pull the clog back up toward the bowl, breaking the blockage and allowing gravity to take over.
More often than not, continuously running toilets are extremely easy and inexpensive to fix – you might just need to replace the flapper. A constantly running toilet also presents an increased risk of flooding. This risk can come in a few forms.
The most common causes for a slow-draining toilet are: A clog in the drain line. A blockage between the tank and bowl. Poor or Clogged Venting.
If the water is overflowing or close to the rim of the toilet bowl while the water is running, or after you have fixed what you thought was wrong, you may want to turn off the water valve to the toilet and call a plumber.
Typically, a running water toilet will waste thousands of gallons of water per month which translates to approximately $200 unnecessarily tacked onto your monthly water bill-- that's nearly $2,500 dollars a year down your toilet bowl. The above scenario is in the case of an extreme toilet leak.
When you are using a baking soda and vinegar solution to clean out your drain, you are actually causing the rubber and plastic that are used for the drain's pipes to be eaten away by the mixture. Over time, this rubber and plastic will break down, causing the drain to become even more blocked.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
Bleach is an effective way to deal with blocked toilet drains as it is a dilute solution of sodium hypochlorite and also contains a high chlorine concentration. Using bleach by itself or mixing it with boiling water are effective ways to unclog a toilet.